Bluetooth Headset For Mitel Phone

Connect And Configure Headsets

Mitel® 6865i Phone: How to Setup the Audio and Headset Options

To connect the headset to the Mitel 5330/5340/5360, 5224/5324, or 5212/5312 IP phone, follow these steps:

  • Plug the headset into the headset jack on the back of the phone.
  • Remove the handset from the cradle. You can hook it over the top of the phone cradle.
  • If using a Mitel 5330/5340/5360, or 5224/5324 IP Phone, press DIRECTORY, then QUIT to take the phone to an onhook state.
  • If using a Mitel 5212/5312 IP phone, press the key, then press the key to take the phone to an onhook state.

    Mitel 5300 Series Bluetooth Module

    We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.View Cookie Policy.

  • Business telephone systems allow multi line communications for your workplace with advanced administration features.

    USEFUL INFORMATION

  • Headsets For Mitel 4001401540254110412041254150 Supercons

    These are pre-bundle Headsets for your Mitel SuperSet 4000 series phones: Mitel 4001, 4015, 4025, 4110, 4125, 4120, 4150 , and Mitel Superconsole 1000, Superconsole 2000. If your Mitel Phone is not listed, call us for compatibility.

    note: if you have a Mitel IP 50xx, 51xx, 52xx, 53xx, 55xx phone, instead

    Note: Mitel recently acquired Shoretel, If you have a Mitel IP212K IP230 IP230G IP265 IP530 IP560 IP560G IP565G 565 565G IP655, IP420 IP480 IP480G IP485 IP485G, look on our ShoreTel IP Phone headsets page

    Plantronics Corded Headsets: Choose any headset from the Plantronics P-Series Headsets page . If you don’t have rev. G or higher, you must use and M22 ampflier instead

    GN Netcom Corded Headsets: Choose any model from the GN Netcom Direct Connect Headsets page. These headsets include the GN1200 smart cable for your Mitel Superset 4000 series phone.

    Wireless Headsets:Plantronics and Jabra/GN wireless headsets are compatible with your Mitel Superset 4000 series phones. To add remote answering you need a Plantronics HL10 Lifter – The Mitel phones are not hookswitch compatible.

    Below are some of our recommended headsets for your Mitel Phone. Still not sure? Call us, our headset expert staff can help you pick out the right headset.

    127

    • 1

    Read Also: Bluetooth Cac Reader For Ipad

    Mitel 5212 Ip & 5224 Ip

    To fit a headset to these Mitel phones plug into the dedicated headset socket, found on the back of your phone. A headset plugged into this socket disables the handset microphone. To restore handset mode either unplug or disconnect the headset. Else, press the programmable PERSONAL headset key.

    Plantronics:Any H or HW series headset and an A10-16 cable.

    Plantronics WirelessCS540, CS510, CS520, CS530, CS Legend & Savi 710, 720, 730, 740:Switch position 1, Receive 3, standard telephone cord wiring.

    Jabra/GN:Any headset and a standard cord, or SMART cord.

    Jabra WirelessJabra Pro 920, 9450, 9460, 9470

    Sennheiser:Any headset top and a CSTD01 cable.

    Polaris:Any Soundpro headset and a SP5021 cable.

    ADD-COM:Any headset and a BLUE Cord.

    Mitel 50006402 Bluetooth Handset/headset Module

    The Tech Company

    We exclusively offer FedEx Ground Shipping for all your purchases with Startechtel.com. We promise speedy delivery, offering FedEx shipping, and getting your orders out the door as fast as possible . We primarily ship using FedEx Ground service, however we reserve the right to ship any other standard method. Business-day standard shipping orders placed by 2:00 pm PST usually ship the same day.

    Covid-19 & Returns: Due to Covid-19, certain manufacturers we carry are no longer accepting returns on their products until further notice and they are only offering replacements if an item is not working. Please feel free to contact us via phone or email to confirm the return policy on any item you might be interested in before purchasing on our website.

    Don’t Miss: Bell Qualifier Dlx Bluetooth Motorcycle Helmet

    Elements Of Your Cordless Module And Accessories

    Feature

    Function

    1) Cordless Module

    Attached to the back of the phone, the module contains a Light Emitting Diode indicating that a cordless device is in use also indicates the state of pairing What does this mean?between the module and a cordless device.

    2) Cordless Headset

    Cordless handsfree operation for calls. If you are using a cordless headset, you do not need to use the handset.

    3) Cordless Headset Charging Cradle

    Provides power to recharge the cordless headset battery.

    4) Cordless Handset Charging Plate

    Provides power to recharge the cordless handset battery. Replaces the handset cradle plate supplied with the phone for corded handsets.

    5) Cordless Handset

    Cordless operation for handset calls.

    6) Cordless Module Pairing Button

    Initiates pairing between the Cordless Module and a cordless accessory.

    7) Cordless Headset Cradle Cable

    Connects to the Cordless Module to provide power to the charging cradle.

    Pairing A Bluetooth Accessory With A Bluetooth Module

    Notes:

    • An IP phone can have one Bluetooth Handset and up to five Bluetooth headsets .
    • To pair a new Bluetooth Handset, you must first unpair the existing Bluetooth Handset.
    • Pairing cannot be performed when a Bluetooth device is already in use.

    To pair I find these notes confusing the use of “paired” and “pairing” with no object is an unusual construction.a Bluetooth accessory:

  • Ensure that the battery of the Bluetooth device to be paired is at least partially charged.
  • Press and hold the pairing button on the back of the Bluetooth Module for 5 seconds to activate phone pairing mode. The LED on the Bluetooth Module blinks. The Cordless Devices application opens on the phone and prompts you to place the accessory in pairing mode.
  • For Mitel Bluetooth Handsets: Press and hold the hookswitch on the side of the Bluetooth Handset for 5 seconds to activate accessory pairing mode. The LED on the handset blinks. The pairing confirmation window on the IP Phone appears, displaying the product name for the device to be paired.
  • Note: If the LED on the handset does not start to blink after 10 seconds, the handset requires charging or is still in factory battery saving mode. Place the handset on the charger. The green LED starts to flash indicating that the handset is charging. It could take up to 60 minutes for the green LED to start Do you mean “stop” flashing?flashing. Allow the handset to fully charge, approximately 3 hours.

  • Press OK to return to the Cordless Devices application.
  • Using The Mitel Dect Cordless Headset 5330e / 5340e

    Note: This section applies only to the Mitel DECT Cordless Headset. It does not apply to third-party Bluetooth headsets.

    The cordless headset offers the same capability as the cordless handset to make and answer phone calls away from your desk while adding the convenience of hands-free operation. When not in use, the cordless headset sits in the headset charging cradle. To use the cordless headset, you must pair the headset with the phone. For more information, see Pairing the Cordless Module and Accessories on page .Elements of the DECT Cordless Headset

    1) Microphone

    5) Hookswitch and pairing button

    2) Boom arm

    4) Volume control with mute switch

    8) Ear hook

    Do one of the following:

    • Lift the cordless headset from the cradle.
    • If the headset is already out of the cradle, press the hookswitch button on the headset.

    Mitel 5001 Ip 5005 Ip 5021 Ip & 5025 Ip

    Pairing Mitel Cordless Headset

    To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.

    Plantronics corded:Any H or HW series headset and a M22 amplifier (switch position 5.

    Plantronics WirelessCS540, CS510, CS520, CS530, CS Legend & Savi 710, 720, 730, 740:Switch position 1, Receive 3, standard telephone cord wiring.

    Jabra/Netcom corded:Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.

    Jabra WirelessJabra Pro 920, 9450, 9460, 9470

    Sennheiser corded:Any headset top and a CSTD 01 cable. Also recommended is the headset/handset switchbox

    ADD-COM corded:Any headset and a Voyager amplifier.

    Pairing A Dect Cordless Accessory With A Dect Cordless Module

    Notes:

    • An IP phone can have only one DECT Cordless Handset and one DECT Cordless Headset.
    • A cordless handset or headset can be paired with only one IP phone at a time.
    • Pairing a new cordless handset or headset with the IP phone overwrites the configuration of any previous handset or headset
    • Pairing cannot be performed when the cordless device is already in use.

    To pair a DECT cordless accessory:

  • Ensure that the battery of the cordless device to be paired is at least partially charged.
  • Press and hold the pairing button on the back of the Cordless Module for 5 seconds to activate phone pairing mode. The LED on the Cordless Module blinks. The Cordless Devices application opens on the phone and prompts you to place the accessory in pairing mode.
  • Press and hold the hookswitch on the side of the cordless handset or headset for 5 seconds to activate accessory pairing mode. The LED on the cordless accessory blinks. After a moment, the Cordless Devices application displays protocol, firmware, hardware, and IPEI information for the device to be paired.

    Note: If the LED on the Cordless accessory does not start to blink after 10 seconds, the accessory requires charging or is still in factory battery saving mode . Place the accessory on the charger and charge. The green LED starts to flash indicating that the accessory is charging. It could take up to 60 minutes for the green LED to start flashing. Allow the accessory to fully charge, approximately 3 hours.

  • Press Close to exit.
  • Pair The Right Voip Headset With Your Aastra/mitel Voip Phones

    Need a VoIP Headset for your Aastra VoIP Phones but, don’t know where to get started? VoIP Supply can help take the guesswork out of which leading VoIP Headsets align perfectly with your Aastra Phones.

    VoIP Supply Headsets for Aastra Phones are available in any headset style that you need for every work environments.

    Download our free headset compatibility guide to help you started and then, give us a call today for expert help with your headset needs!

    Mitel 5320ip 5330ip & 5340 Ip

    To fit a headset to these Mitel phones plug into the dedicated headset socket, located on the back of the phone.

    To turn on Headset Mode:

  • Dial 317 .
  • HEADSET MODE ON appears.
  • Because Headset Mode disables the handset and speakerphone, you must turn off Headset Mode before you can use the handset or speakerphone.

    To turn off Headset Mode:

  • Dial 317 .
  • Greater Productivity And Comfort

    Mitel Cordless Bluetooth Headset and Handset module ...

    Jabra PRO 920 frees users from their desk, enabling them to find documents and multi-task with maximum efficiency while on a call. Apart from being able to walk and talk up to 120 m/325ft away from their desk, users will also benefit from enhanced ergonomics as the headset prevents neck strain caused by pressing a phone to their ear for long periods.

    Wireless Headset Compatible Mitel Telephones:

    • Superconsole 1000, Superconsole 2000, 3DN, SuperSet I, II, 3, 4, 4DN, 7, 410,420, 430, 4001, 4015, 4025, 4125, 4150, SuperSet 700 , SuperSet 7000 .
    • SX series: SX20, SX50, SX100, SX200, 200VS, Digital Super Console, TalkTo , Symbol, Navigator
    • Mitel IP phones: 5000, 5010, 5020, 5040, 5040 ip, 5055, 5055 ip, 5055 sip, 5140, 5201, 5205, 5207 ip, 5210, 5212, 5215, 5220, 5224, 5230, 5235, 5240, 5250, 5312, 5320, 5324, 5330, 5340, 5540, 5550, 8528, 8568
    • Mitel IP Unified Communications – Navigator softphones – PC – Smartphones .
    • Notes For: Superconsole 1000, Mitel 5540 console, Mitel 5550 console

    If don’t see your phone model or not sure which Mitel headset is compatible with your Mitel phone contact us via chat, email or call us 703-766-6363 so we can provide you with details for the most suitable headset for your environment.

    Refine by

    Mitel Headsets For Ip Phone Models 50xx 51xx 52xx 53xx 55xx

    These are pre-bundle Headsets for your Mitel Phone models: 5000, 5001, 5005, 5010, 5020, 5021, 5040, 5055, 5140, 5201, 5205, 5207, 5210, 5212, 5215, 5220, 5224, 5230, 5234, 5235, 5240, 5250, 5304, 5310, 5312, 5320, 5324, 5330, 5340, 5360, 5540, 5550, 8520, 8528, 8560, 8568, 8600. and Mitel Superconsole 1000, Superconsole 2000. If your Mitel Phone is not listed, call us for compatibility.

    note: If you have a Mitel Superset 4001, 4015, 4025, 4110, 4120, 4125, 4150 phone, Go Here instead

    Note: Mitel recently acquired Shoretel, If you have a Mitel IP212K IP230 IP230G IP265 IP530 IP560 IP560G IP565G 565 565G IP655, IP420 IP480 IP480G IP485 IP485G, go to our ShoreTel IP Phone headsets page

    Plantronics Corded Headsets: Select any pre-bundle headset from the Plantronics Polaris Headset page. These pre-bundle headsets include the necessary Plantronics A10 cable for your Mitel phone.

    GN Netcom Corded Headsets: Choose any model from the Jabra/GN Netcom Direct Connect Headsets page. These headsets include the GN1200 smart cable for your Mitel IP phone.

    Note: Mitel6865i, 6867i, 6869i, 6871, 6920, 6930, 6940 you need Plantronics U10P-S19 or Jabra GN1200 cable instead

    For Mitel 5370, 5370 IP, 5380, 5380 IP, 6735i, 6737i, 6739i, 6753i, 6755i, 6757i, 6771, 6773, 6773 IP, 6775, 6775 IP, 6865i, 6867i, 6769i, 6920, 6930, 7434 IP and 7444 IP, you can use Plantronics APS-11 EHS for Plantronics Wireless headsets, Jabra Link 10 EHS Cable for Jabra wireless headsets.

    123

    • 1

    How To Pair Mitel Bluetooth Module With A Cordless Bluetooth Headset

    • Date updated

    How can I pair my bluetooth headset with a Mitel phone?

    In this example we provide instructions how to pair a Jabra GO 6470 with the Mitel IP phone. Although these headset instructions below have the Jabra 6470 Bluetooth Headset you can use the steps to pair with the Mitel Bluetooth Module with other Bluetooth Headsets that support A2DP

    List of other Bluetooth Headsets

    • Mitel IP Phone 5330, 5340, or 5360
    • Mitel Bluetooth Module

    To pair the Jabra GO 6470 device:

  • On the Base Unit’s display click on the Yellow wrench
  • Select Phone settings > Mobile Settings > Setup Mobile phone
  • Tap confirm on the display screen to start the Mobile connection wizard and follow instructions
  • Now you must activate the pair mode on the Mitel phone
  • To pair the Mitel Bluetooth Module:

  • Press and hold down the pairing button on the back of the cordless module for 5 seconds.
  • The LED on the cordless module blinks. The Cordless Devices application opens on the Mitel IP phone and prompts you to press the pairing button on the cordless device.
  • The LED on the cordless device blinks. After a moment, the Cordless Devices application on the Mitel IP phone displays information for the device to be paired.
  • Press Yes to confirm pairing. The Cordless Devices application confirms the pairing by displaying the paired device name and its battery level indicator and the number of devices paired.
  • Press Close to exit.
  • Mitel 5330 5340 And Wireless Headsets Compatibility

    Mitel® 6867i Phone: How to Setup the Audio Mode and Headset Options

    Article ID: 37577 Answer

    Wireless Headsets do work with Mitel 5330 and Mitel 5340 IP Phones. As long as you are using one of the major headset manufacturers .

    The tricky part when using Mitel telephones is the programming and set up of the IP phone itself. Mitel IP telephones come with various settings, options and features that can be enabled/disabled and sometimes they can conflict with wireless headet usage. Customers have contacted us with this scenario: “All is working well, but I have a question on functionality. It appears that the wireless lifter works and takes the phone off the hook, but I get no dial tone I must press the speaker button. Additionally, I must press the speaker button to hang up. Is this expected?”

    Another common question is “Can I use a wireless headset to roam the office?”. The short answer is YES. In order to walk around the office and answer calls with a wireless headset you will need both a wireless headset along with a “lifter”. The lifter functions to allow you to pickup and hangup calls directly from the headset. You need to get the correct lifter for the wireless headset you use. Stay with the same brand of lifter/wireless headset.

    LIFTERS:

    Here are a couple of tricks our techs have found specifically with the 5330 and 5340 phones.

    TIPS:

  • Disable the Handsfee mode on the phone.
  • With the handset on-hook, dial 319 to turn Handsfree Mode off/on . Set the Handfree Mode to “off”.
  • Using Your Phone With The Cordless Module And Accessories 5330e / 5340e

    Cordless handsets and cordless headsets provide you with the capability to move around within your own office or adjacent offices while using your phone. These cordless devices connect to your IP phone through a Mitel Cordless Module, which attaches to the back of the phone. There are two Cordless Module types available: Digital Enhanced Cordless Telecommunications and Bluetooth®. The DECT Cordless Module works with the Mitel DECT Cordless Handset and Mitel DECT Cordless Headset. The Bluetooth Module works with the Mitel Bluetooth Handset and most third-party Bluetooth headsets. The Mitel Cordless Handsets recharge in the handset cradle. The Mitel Cordless Headset rests and recharges in a headset cradle that attaches to the side of the phone. The Cordless Devices Application provides access to the configuration settings and information screens that apply to the cordless module and accessories.

    Note: Since only one module type can be attached to the phone at any given time, you cannot, for example, use a 5310 Conference Module when a Cordless Module is attached.

    CAUTION: Attempting to remove the back plate on the phone to install a Cordless Module before disconnecting the phone’s power supply may damage the phone. For details on installing a Cordless Module, see the appropriate Cordless Module and Accessories Installation Guide for Mitel 5330e/5340e/5360 IP Phones included with the module and available at Mitel OnLine.

    Rear View of 5300 Series IP Phone

    Headset Alerting Tones And Leds

    The cordless headset provides the following alerting tones:

    Feature

    2-pitch tone occurs immediately. Reminder tone occurs 30 seconds after activation and then regularly until deactivated.

    Mute key on Phone ON/OFF

    No immediate tone. Reminder tone occurs 30 seconds after activation and then regularly until deactivated.

    Low battery

    3 beeps and 20 second pause

    Low battery

    3 rapid beeps and 1.5 second pause

    Out of range

    Repetitive 3-pitch tone until you are back in range. Note: If you are out of range for more than 10 seconds, any call that is in progress is dropped and not recovered.

    There are two LEDs associated with the cordless headset:

    • A blue LED on the headset indicates the headset status
    • A green LED in the headset charging cradle indicates battery status

    Popular Articles

    Related Stories