Bose Soundlink Wont Stay Connected To A Mac
Some Mac users are complaining that Bose Soundlink wont stay connected to their computer via Bluetooth. The device disconnects itself from their Macs whenever they try to play sounds. They tried resetting their Macs and the speaker, but nothing worked.
Well, the best way to resolve the problem is to follow these instructions:
The four steps above will reset your power management settings, and hopefully, fix the problem.
Connect Speaker With Bluetooth
1. Turn on the speaker
The power button for the Bose speaker is located on the upper right side of your device.
The first time you turn on your Bose speaker You would be prompted to select a language.> Press or + to scroll through languages.> To select the language you wish, press and hold the three-dotted button to save.> After the language is selected, the beeper sounds Ready to pair.> Skip to step 3.
If you are not prompted to select a language carry on with step 2.
2. Activate the Speaker’s Bluetooth
- Hold down the Bluetooth button for three seconds to activate the Bluetooth pairing mode. The Bluetooth button has a B-shaped Bluetooth icon.
- Now verify that your Bose speaker has entered pairing mode. This can be confirmed by looking for a blue flashing light near the Bluetooth button.
3. Open the iPhone’s Bluetooth settings
4. Search for Bose Speaker
The iPhone will instantly start searching for discoverable devices.
After the iPhone finishes its search, it will return the name Bose SoundLink. This name will be listed under the Devices column.
Note: Your speaker may be called differently. If so, tap the device that appears to be your bose speakers.
5. Connect iPhone to Speaker
Make Sure Power Outlet Is Functioning
If power outlet is faulty, theres a possibility that the speaker does not turn ON because it was not sufficiently charged. In here, you have to make sure that power wall outlet where speaker is connected to for charging is working.
Ideally, when Bluetooth speaker is connected to an outlet for charging a tone or beep is heard. However, if a tone is not heard when plugged into the outlet try using another working electronic device and plugged it into the outlet. If the electronic device is charging, this means that the power outlet is not at fault it. You may now proceed with the next method to fix this problem.
You May Like: How Does Bluetooth Work With Hearing Aids
How Do You Fix A Blinking Red Light On A Bose Soundlink Revolve
If the battery LED status indicator on your product is red and flashing fast, try the following:
Too Many Devices On The Pairing List
If that doesn’t help then you might have to clear your pairing list with these easy steps:
On the speaker, press and hold the Bluetooth button for about 10 seconds until you hear a noise. The speaker will clear all Bluetooth devices from its memory and will be able to be discovered.
Clear the list on your Bluetooth device. For more information you will have to refer to the manufacturer for support of your device.
If those don’t help then try pairing the device again by following these steps:
With the Bluetooth device and the speaker both turned on, press and hold the Bluetooth button on the speaker for three seconds to make the speaker be discovered. The Bluetooth indicator will slowly turn on and off to show the speaker is able to be discovered.
On your device, locate the Bluetooth device list and select “Bose SoundLink” from the list.
If your device asks for a code, enter digits 0000 and press OK. Some devices also ask you to accept the connection. Your Bluetooth device will indicate when pairing is complete. The SoundLink Mini speaker will let you know when pairing is complete when the Bluetooth indicator stops turning on and off and remains on.
Read Also: Play Music From Phone To Car Bluetooth
Bose Volume Buttons Not Working
Although most Bose buttons are designed to prevent debris collection underneath, this is still a possibility for buttons that are not sealed, such as those on the headphones. If the button is stuck, you should try pressing it multiple times to unstick the button or dislodge the debris.
Alternatively, you can try the general troubleshooting methods outlined at the beginning of this article.
Some iPhones also have a Shake-and-Shuffle feature, which can affect the function of your Bose device. If this is the case, turn this feature off to use your device normally.
Some Bose products, such as the earbuds, will need to have the volume control enabled via the Bose Music app . This is a feature that helps limit the functionality of such a small product. Some people prefer to limit these functions to make the product easier to use.
Another basic cause would be that the button itself is broken. If no other troubleshooting methods are working, you may need to contact Bose for a replacement.
Speaker Not Turning On When Connected To Power
There can be a case when the speaker does not come to life even after plugging into the wall socket! In that case follow the following simple checks to get it back to life.
Recommended Reading: Bluetooth Keyboard And Mouse For Ps4
Dont Forget Your Warranty
If your Bose earbuds are still under warranty and already giving you a hard time, then take them back for a new pair. Even though the technology is new, there is always the chance of getting a faulty model. If your earbuds have started to malfunction, the best thing to do is replace them and save yourself the headache.
Check For Available Bose Product Updates
An outdate version of the products can cause issues. Make sure to update Bose product to the latest versions available to avoid and prevent software related issues. Updating enhances the products and introduces new features
Updating can be done with two methods, via the Bose connect app or using the Bose Online Update on Bose website.
After following the methods mentioned above, you will successfully fix Bose Speaker Wont Connect To Phone or Bluetooth device.
Visit our TheDroidGuy Youtube Channel for more troubleshooting videos
You May Like: Xbox One Bluetooth Headset Adapter
There Have Been Eight Devices Connected To The Speaker
The speaker can only store information about the last eight devices that were paired with it. To select your device, repeatedly press the Bluetooth button on the speaker until you hear the name of your device. If you don’t hear your device’s name, clear the speaker’s device memory. To clear the memory and connect your device, press and hold the Bluetooth button on the speaker until you hear a tone and, if voice prompts are enabled, you will also hear a voice prompt. Then the Bluetooth light will begin flashing blue and you can try to connect your device to the speaker again.
Look For Wireless Interference Sources
Its conceivable that other wireless devices are interfering with your products wireless functioning. Look around your product for other wireless gadgets . Unplug a devices power cord or turn off its Wi-Fi to see if its interfering.
If the problem goes away when a certain gadget is removed, consider moving it as far away from your product as feasible. Also, if your device has a wireless channel setting, try a different one.
Read Also: Best Bluetooth Speaker For Gym
Power Cycle The Headphones
The classic tech advice of turning your device off and on again when its not working may trigger an eye roll, but it often works. You just have to do it the right way.
Power cycling your headphones is a soft reset that helps reboot the headset. This stops all backup processes and erases low-level errors in your headphones firmware without erasing the settings, such as the name and pairing list.
To power cycle your Bose headphones, do the following:
Connect Speaker Using Nfc
1. Turn on your Bose SoundLink speaker.
2. Open your NFC reader on your iPhone.
Swipe down from the top-right corner to open your iPhone’s control center.
Tap the NFC Symbol in your iPhone’s control center.
If you don’t see it there, follow these steps to add the NFC reader to your iPhones control center.
3. Place your iPhone on the Bose logo.
Place and hold the back of your iPhone on the bose logo for a few seconds. Your iPhone will prompt you to accept the pairing.
Fyi:The NFC target area on all Bose speakers is the Bose logo.
And voila! Now your speaker is connected!
Incorrect Connection To Power Source
Make sure the power cord is correctly inserted into the outlet and to the power port in the back of the speaker as some chances the cord will not be set properly.
If the speaker is connected to a surge protector, make sure the surge protector is turned on and properly connected to the outlet. If it still does not work, plug the power cord directly into the outlet.
Can You Overcharge Bose Speakers
Bose speakers are equipped with lithium-ion batteries lithium-ion batteries stop charging as soon s your device reaches 100% battery, meaning leaving your speakers plugged in wont overcharge your device. However, exposing your bose speakers to extreme temperatures can permanently cause damage to your devices battery capacity.
Also Check: Best Modular Bluetooth Motorcycle Helmet
Bose Headphones Updater Not Working
The Bose software updater provides the latest features and enhancements, which allow the headphones to work at their best.
While the software updates can be done automatically from the Bose app, its not always reliable. For this, its best to go through the manual route via the Bose Updater website. Heres how:
Check If Bluetooth Is Enabled On Both Devices
The very obvious reason why product does not connect to Bluetooth is because settings is not enabled. When that happens, nearby devices could not search and connect to Bluetooth. If both devices have been paired before, once Bluetooth is ON it will automatically connect.
Time needed: 1 minute.
It is located on the last button to the right.
When the blinking blue light appears, this means that the device is now discoverable.
After making sure settings are enabled, check if wont connect issue still occurs.
Read Also: Best Buy Lg Tone Pro Bluetooth Headset
Check If Your Headphones Are Counterfeit
There are reports of fake Bose QuietComfort 35 headphones being sold on Wish. Luckily, If youre one of many who bought these alleged fake headphones, or if you think your headphones are fake, there is one easy way to quell any doubts about the authenticity of your headphones connect them to the Bose Connect App.
Currently, scammers are capable of copying the look and feel of legitimate Bose headphones. They can also even have searchable serial numbers copied from legitimate Bose headphones.
However, the Bose Connect app is only designed to connect with official Bose headphones.
There is no way for any manufacturer to reverse-engineer the firmware to allow counterfeit headphones to connect with the Bose app, no matter how good they are.
So, if the Bose Connect app cant detect your headphones, theres a high chance that what you have is counterfeit.
If you feel like youve been scammed into buying a pair of fakes, give Boses counterfeit products page a look over and contact them immediately.
How To Replace The Earpads Of Bose Headphones
From our discussion, we can see that Bose headphones are not foolproof, and even their earpads are no exception. For example, they can wear out from frequent use, improper storage of your headphones, or poor handling.
Since you cant toss out a pair of sweet-sounding headphones just because of worn-out earpads, its better to replace them.
To replace your earpads, simply do the following:
Recommended Reading: Bluetooth Rear Surround Sound Speakers
How To Reset Other Bose Soundlink Speakers
While the above are some of the most common Bose Soundlink speakers, quite a few Soundlink speakers Bose has made over the years. If you don’t see yours listed here, Bose lists all speaker instructions on its support website. Simply enter your specific model’s name into the search box to learn how to reset your speaker.
When Your Bluetooth Device Is Out Of Range
When your device is out of range, your Bluetooth speakers will turn off. Depending on the model, when your previously paired device comes back in range, it will automatically connect. Models like Bose SoundLink Revolve come equipped with low energy Bluetooth technology. This will automatically turn on when the connection is available and disconnect when out of range or when you disconnect your device.
It is important first to check your Bluetooth connectivity when your speaker goes off. You should check both your speaker and your connected device. Re-pairing should be configured to enable or disable the auto-pairing feature.
Additionally, if your Bluetooth speaker is connected to your Windows laptop, it can be configured to go off when your Windows 10 goes off or on standby. In this case, you will have to either switch off Bluetooth on your Windows computer or disable the feature to stop Windows 10 from waking up your speaker.
Don’t Miss: Bluetooth Earbuds With Ambient Sound
Connecting To The Internet Via Wifi
Wi-Fi is another option for setting up a Bose soundbar wirelessly. Press and hold the TV and skip back buttons on the provided remote for three seconds. The indication light should then turn amber, indicating that its ready to use.
Activate the Wi-Fi settings on your output device and pick your Bose soundbar. After that, open a browser page on your smartphone and type 192.0.2.1 into the address bar.
Before clicking Submit, the Bose soundbar Wi-Fi setup page will appear, prompting you to select your home Wi-Fi network and enter the password.
Battery Is Damaged Or Not Charged
Make sure the battery is fully charged before removing it from the A/C power source. This will ensure the battery has an adequate charge to function.
The battery may be damaged or can no longer function. This can happen over time with general wear and tear. In this case, replace the battery. The following link is a step by step instruction for removing the battery.
Also Check: Best Outdoor Bluetooth Speakers Under 100
Bose Soundlink Wont Pair Or Is Not Connecting To A Mac
There are many reasons why Bose Soundlink does not automatically pair with or connect to your Mac. However, regardless of whats causing your problem, know that you can easily fix it.
Pro Tip: Scan your Mac for performance issues, junk files, harmful apps, and security threats that can cause system issues or slow performance.
Follow the steps below on how to connect Bose Soundlink to a Mac, and you should be all set for a great listening experience: