Connect Old Stereo To Bluetooth Speakers

Flaws But Not Dealbreakers

HOW TO CONNECT BLUETOOTH A OLD STEREO SYSTEM

Our biggest complaint about the StarTech BT2A is that it doesnt support multiple active connections: If youre listening to music from your phone and want to switch to playing music from your tablet, you have to break the active Bluetooth connection with the phone , and then connect the tablet. Three models we testedthe Grace Digital 3Play, Motorola Moto Stream, and Avantree Roxasupport multiple active connections:2 In the above scenario, your tablet would already be connected, so when you begin playback on the tablet, the receiver would automatically switch to playing the tablets audio. If you have multiple streaming source devices and frequently switch between them, this is a very convenient feature, and one we wish the BT2A offered. However, the three models that include it all have big drawbacks in other areas, and the feature itself often didnt work as expected.

The range of our top pick isnt outstanding, but its comparable to that of most Bluetooth devices: 30 to 40 feet unobstructed or 20 to 30 feet through walls and other obstructions. To get significantly better range without making compromises in other areas, you need to opt for something more expensive, such as our upgrade pick. Similarly, like all but one of the devices we tested, the BT2A occasionally skipped for no apparent reason, despite being near the transmitting device with a clear line of sight. Our upgrade pick was the only device that never had this issue in our testing.

How To Add Bluetooth To An A/v Or Stereo Receiver Choosing The Right Equipment

If you dont choose the right equipment, you may end up not being able to make this work. Try to make sure the Bluetooth receiver you buy comes equipped with output plugs that match the input plugs on your stereo receiver or A/V. However, if they are not compatible, you can buy converter cables to fix the problem.

There could be a situation where your A/V or stereo receiver only has digital plugs, but you need a model with analog audio outputs. Again, no worries, because there are wall-powered converter units available. However, most modern Bluetooth receivers have analog audio outputs, so this shouldnt be much of an issue.

Two kinds of Bluetooth receivers

There are generally two kinds of Bluetooth receivers, either wall-powered or battery-powered. The battery-powered units can also be powered via a car stereo radio auxiliary input. These are good products that have fewer cables, but they can be troublesome because they constantly need charging, and the batteries need replacing regularly.

Wall-powered Bluetooth receivers are much more suited for your home theater system. You might need to extend your surge protector, but once you have set up everything, wall-powered receivers are easy to maintain.

The Difference Between Wired And Wireless Speakers

All speakers, whether wired or wireless, need three things to work: an audio signal, power, and amplification. Amplifiers, wires, and cables supply those requirements for traditionally wired speakers.

Wireless speakers plug into power, have built-in amplifiers, and instead of copper wire or cable, the audio signals transmit wirelessly to them via IR , RF , Wi-Fi, or Bluetooth. Traditionally wired speakers don’t have a built-in amplifier and cannot receive audio signals wirelessly. Still, you can make them “wireless” with the use of add-on devices.

You May Like: Best Home Bluetooth Speakers For Music

Connect The Bluetooth Adapter To The Receiver

Next, youll need to actually connect the two devices using the red and white A/V cables that will come with the adapter. These are also known as RCA cables, and there will only be two of them because of the limitations of Bluetooth technology it will only carry two channels of sound. We have more details on what sound channels are and how to think about them if you need it, but the bottom line is this is a serious limitation.

However, the cables will be simple to install: match the red and white RCA cables up with the Bluetooth adapters red and white outlet ports, then plug the other end of the cables to your receivers red and white RCA input ports.

How To Connect Wireless Speakers To Receiver Using Bluetooth Connectivity

Amazon.com: QK Radio Retro Bluetooth Speaker

You can connect your receivers to a wireless speaker by using a Bluetooth transmitter.

  • Plug the Bluetooth transmitter into the headphone port of the receiver.
  • Turn on the receiver after plugging it into a power source.
  • After that, the transmitter powers up and activates a Bluetooth signal that can connect to your Bluetooth-enabled device.
  • Pair the wireless speaker and the Bluetooth transmitter through Bluetooth connectivity.
  • Once connected, play your music through the receiver and enjoy playing your music without the hassle of wires.

If your receiver doesnt have a 3.5mm headphone jack, you might need a 6.5mm to 3.5mm adapter to use your Bluetooth transmitter. You can also use an RCA to 3.5mm port adapter to use your transmitter.

You May Like: 2002 Honda Accord Bluetooth Radio

Connecting A Bluetooth Adapter To Your Receiver

Connecting your receiver with a Bluetooth adapter is a simple process. You will need to physically connect them via the red and white A/V cables, which are also known as RCA cables. Match the two RCA cables with the red and white ports on your adapter with the input ports on your receiver.

You will only be able to carry two channels between your receiver and adaptor because Bluetooth has its limitations. I will recommend some of the best Bluetooth adapters later when we discuss this subject in greater detail.

Things To Think About

  • Make sure you can addBluetooth functionality to non-Bluetooth Audio Sources. This might sound like asimple thing, but there are a few different types of Bluetooth enabling devicesout thereno point buying a receiver meant for a car when you need one tochange wired speakers into wireless.
  • Fast setup for immediate usage. Aim for plug and go withouthaving to download additional apps.
  • Relies on A2DP Bluetoothprofiles. This is to ensure a smoothoperation between the device and whatever you want to play audio from .
  • Low Latency technology. This will stop your audiofrom having a lag or delay.
  • Size. Our advice is to getsomething small and durable rather than big and bulky, but it will depend whatyou think will look best with your speakers and the functionality of thedevices.
  • Quality. This goes without saying butchoose a manufacturer that prioritizes quality and has good customer serviceand warranty. Buying super cheap might seem great at first, but if it breaksquickly and without warranty then you will have to pay out more to buy thedevice again.
  • Price. Similarly, make sure youpick a budget and stick to it. Theres no need to spend hundreds of dollars, oreven to spend $50. You can get high quality for less. But do your research toget the best quality for the price.
  • Learn more about Bluetooth audio receivers at our blog.

    You May Like: Bluetooth 5.0 Adapter For Pc Windows 10

    Installing A Bluetooth Receiver

    Theres a lot more to choosing the best Bluetooth receiver than most people realize. Although the installation phase is fairly simple, understanding the types of A/V and stereo receivers is a great start. So, check out my step-by-step process of setting up a Bluetooth receiver from inception to installation.

    Make A Subwoofer Wireless

    How to Add Bluetooth to Stereo Receiver / AV Receiver

    If you have a subwoofer in your home theater setup, make it wireless with a wireless speaker conversion kit with a subwoofer input on the transmitter and a subwoofer output on the wireless receiver.

    This is easy to do if you have a powered subwoofer . Powered subwoofers have built-in amplifiers and plug into AC power.

    There are two steps to add wireless connectivity to a subwoofer: First, connect the Subwoofer output of a stereo or home theater receiver to the wireless transmitter using a short RCA cable. Next, connect a short RCA cable from the wireless receiver to the subwoofer’s RCA stereo or LFE inputs.

    If you have a passive subwoofer that you wish to make wireless, place an external amplifier between the wireless receiver and the subwoofer unless the wireless receiver has a built-in amplifier with sufficient power output for the subwoofer.

    Don’t Miss: Bluetooth Stereo Receiver With Subwoofer Output

    Pair With Bluetooth Receiver

    Once you have connected your Bluetooth receiver to your speakers, you have finished the hard part. Now you will need to pair your device with the Bluetooth receiver. First, turn on your Bluetooth receiver. If you have powered speakers, plug them in after turning on your Bluetooth receiver.

    Next, set your Bluetooth receiver to pair. Finally, turn Bluetooth on on your device and find your Bluetooth receiver and pair. At this point, you should be able to broadcast audio to your speakers. Happy listening!

    How To Connect Wireless Speakers To Receiver Easily

    HomeAudiophile Hacks

    Wireless speakers dominate the market today, with smartphones slowly removing the 3.5mm ports in their systems. However, these wireless speakers sometimes lack the power that a receiver can provide. We will show you how to connect wireless speakers to receivers in easy to understand steps so you can have the listening experience you deserve.

    Also Check: 3 4 Helmet With Bluetooth

    Explained Outlined Process :

    If above explained brief procedure doesnt satisfy your queries then follow the following complete process for how to connect wireless speakers to stereo receiver:

    A) Set up your Wireless Speakers

    Place the wireless speakers in the rooms or regions where you intend to listen to them. If necessary, plug the wireless speakers power cords into an electrical outlet or insert batteries in them.

    B) Connect Adapter Stereo System

    A wireless adapter serves as the link between the speakers and the stereo system. Connect the RCA cord to the wireless adapter when the stereo system is turned off. An audio line is created by the connection.

    Connect the adapter to the system with the other end of the RCA cable. This step consists of simply plugging the ports in. The output port is used to connect the sound system.

    C) Turn off the Stereo

    If you havent already, turn off the stereo amplifier or receiver. Connect one end of the RCA audio Y-cable to the wireless adapter modules Line In or Audio In ports on the back.

    Connect the other end of the audio Y-cable set to the original stereo amplifier or receivers headphone jack.

    D) Turn on the Adapter

    The AC power adapter will then be used to connect the adapter to the socket. The connection guarantees that the wireless adapter receives consistent power.

    E) Turn on the Stereo System

    What Is A Bluetooth Adapter

    Boytone BT

    There are two main types of Bluetooth adapters used to connect devices that arent usually compatible with Bluetooth. The first one is a transmitter. This device enables TVs and home theater systems to stream high-definition sound to speakers and headphones. They transmit signals for you to be able to control from a compatible device.

    The other device is a Bluetooth receiver. This device takes in a Bluetooth signal to stream audio from an existing non-Bluetooth device. This can attach to your digital or analog system and send songs from your phone to your speaker.

    Both of these devicesserve different purposes. One isnt necessarily better than the other, it just depends on what you want to use it for. They will both be beneficial to your daily life in various ways. Old stereo systems can use Bluetooth receivers to play music from Apple Music or Spotify. This way you arent limited to only playing music you own on records or tapes.

    Also Check: How To Play Radio On Bluetooth Speaker

    Why Make Home Stereo Components Wireless

    There may be many reasons why you want to make your home stereo wireless.

    Maybe you have a traditional stereo rack with a receiver that is connected to speakers and different music sources like a CD player, a tuner, and a turntable. And you want to add the option to stream music wirelessly from your mobile phone to the stereo receiver.

    Or you may have a set of wireless Bluetooth speakers or wireless headphones that you want to connect wirelessly to a traditional music source like a CD player.

    Well look at solutions for many different scenarios in a second.

    Advantages Of Converting Your Old Wired Speakers To Wireless

    We suggest that you turn your old wiredspeakers into wireless speakers! By choosing a Bluetooth adapter to make themBluetooth enabled, you can connect your smartphone, laptop, and even televisionto them, making it easy to use them to stream music, movies, podcasts, andother audio.

    There are many advantages when you convertwired speakers to wireless.

  • You can use your old speakerswith your smartphone, by connecting via Bluetooth. This means you dont have tobuy CDs or download albums anymore, and you dont have to buy endless wiresand random accessories to be able to connect your iPhone to your speakers. Anadded bonus is that you can also connect to any other Bluetooth enabled device,such as a laptop.
  • You can use your old speakerswith Chromecast for Audio and Echo Devices. Make Alexa sound great as she makesthe most of your speakers and have your music and audio choices really fill theroom.
  • Breathe new life into yourwired speakers as part of an established wireless audio system. Upgrade yourentire television experience without having to spend extra cash on newspeakers.
  • Cut down on wire clutter withtraditional sources. When you go wireless, you benefit from there being lesswires around. Not only does this look cleaner and mean that you can keep yourphone with you as you walk around the housenot attached to your speakersyoucan keep the wires out of reach of curious hands.
  • how to add Bluetooth to your old car.

    Read Also: Clone A Phone Via Bluetooth

    The Benefits Of Making Wired Speakers Wireless

    Adding wired speakers into a wireless setup provides some great benefits:

    • Use wired speakers with your smartphone and Bluetooth.
    • Use wired speakers with Chromecast for audio and Echo devices.
    • Breathe new life into wired speakers as part of an established wireless audio system.
    • Cut down on wire clutter with traditional sources.

    However, regardless of the wireless audio source, signal transmission, or reception method used, you still must make a physical cable or wire connection to the speakers to make them work. You also need to provide power to your sources and wireless-to-wired conversion devices.

    Wireless speaker kits and related products are made by several manufacturers and available at electronics stores and online retailers. Costs vary depending on whether the brand and model of transmitter and receiver are packaged together as a kit or sold separately and whether you need an additional amplifier to complete your setup.

    How Do I Connect My Turntable To Bluetooth

    Connect to old computer speakers via bluetooth

    To transmit your turntables signal via Bluetooth, all you need is a phono preamp and a Bluetooth transmitter. If you have a built-in preamp on your turntable, then you just connect the transmitter to your turntables RCA output. If you have an external preamp, connect the transmitter to the phono output on your preamp. Once your transmitter is connected, you can pair your turntable with any Bluetooth-connected speaker or amp.

    Don’t Miss: Best Bluetooth Earphones For Work

    The Limitations Of Bluetooth

    Home theater builders and surround sound aficionados have only recently started to use Bluetooth for their wireless audio systems. And this is mainly because of the limitations of Bluetooth functionality. Bluetooth was initially intended to wirelessly broadcast a signal between two devices. This technology was originally introduced for connecting media devices with headsets.

    To be completely honest, Bluetooth should probably be the last method you use for wirelessly sending audio transmissions. This is even though most modern theater systems support it. However, sometimes we have to make do with the only options we have. So, here are some of Bluetooths more glaring limitations

    How To Make Your Wired Speakers Wireless

    You don’t need to buy new speakers to go wireless. Follow these simple tips to affordably add Wi-Fi or Bluetooth to an existing speaker set so you can pair it with your phone or tablet and stream your favorite music.

    So, you have a pair of wired speakers that are connected to a stereo receiver you love, or maybe you have a self-powered pair, or a 2.1 system that’s perfect for watching movies. But all of your friends are buying smart speakers they can talk to, or at least stream music to, and you want to get in on the wireless revolution. We’re here to help. There are plenty of ways to introduce wireless connectivity to your current setup, most of which are relatively inexpensive and easy to accomplish.

    Read Also: Wireless Bluetooth Adapter For Cricut

    How To Make A Non

    If you have a traditional stereo amplifier or receiver it is easy to make it Bluetooth capable with a Bluetooth adapter.

    You simply connect the adapter to one of the LINE level inputs on the amplifier/receiver using the RCA female cable that is included with the adapter.

    LINE level inputs are those that are marked LINE, AUX, TAPE, CD, TUNER, and so forth. Just choose one of the inputs that are available.

    Set the adapter in RX mode. We want to use the adapter as a receiver in this case.

    You then have to pair the adapter to the music source by following the included instructions and you are ready to stream music wirelessly to the amplifier/receiver from a Bluetooth compatible source like for instance a mobile phone.

    The user manual that is included with the adapter will explain the pairing process thoroughly so please refer to the user manual for step-by-step guidance. Or you can watch this YouTube video that explains the process.

    How Do I Convert Old Speakers To Wireless

    Connect old speakers to bluetooth

    The good news is there are several ways to convert wired speakers into wireless ones, from Bluetooth receivers to wireless conversion kits.

  • Turn Wired Speakers Into Bluetooth Speakers.
  • Add Wired Speakers to Chromecast for Audio and Select Echo Devices.
  • Add Wired Speakers to an Established Wireless Audio System.
  • Read Also: Portable Hd Radio With Bluetooth

    Popular Articles

    Related Stories