Connect To My Bluetooth Speaker

Primer On How Speakers Work

How to Connect Bluetooth Speaker to Laptop

Before getting into the substance of this article, lets quickly go over how speakers work.

When it comes down to design, Bluetooth speakers are really no different than most other active speakers . The big difference is the wireless transfer of audio via Bluetooth rather than the typical wired connection .

The main purpose of a loudspeaker is to act as a transducer that converts electrical energy into mechanical wave energy . This is true regardless of if the speaker is wired or wireless.

Related article: What Is The Difference Between Sound And Audio?

The transducer element of a speaker is called the driver. Speakers may have many other components , but the driver are the key transducer components that turn audio signals into sound waves.

For a comprehensive guide to speaker drivers, check out my article What Are Speaker Drivers? .

Every loudspeaker works upon this function: an analog audio signal passes through the driver and causes proportional movement in the drivers diaphragm.

The diaphragm movement pushes and pulls the air around it and effectively produces sound waves that mimic the form of the AC voltage of the audio signal.

This critical action in speaker design is required regardless of the speaker type, the number of drivers, crossover network, enclosure and form factor, how it receives its signal , or any other specifications that differentiate one loudspeaker from another.

The overwhelming majority of loudspeaker drivers are electrodynamic .

How To Connect Multiple Bluetooth Speakers

Picture this. You have two speakers but playing on either one isnt loud enough for you. Wouldnt it be better if you could play your favorite song on both speakers at once?

After connecting your mobile/laptop to multiple Bluetooth speakers, you can enjoy a more realistic and rich sound experience with the stereo mode.

So, without further ado lets dive right into the article to learn how you can connect multiple Bluetooth speakers.

  • What Is Bluetooth Version 5?
  • Connecting To A Bluetooth Audiodevice

  • Turn on the projector.
  • Select the Settings menu and press Enter.
  • Select HDMI Link and press Enter.
  • Select Audio Out Device and press Enter.
  • Select Projector and press Enter.
  • Press Esc until you return to the Settings menu.
  • Select Bluetooth and press Enter.
  • Select Bluetooth Audio and press Enter.
  • Select On and press Enter.
  • Press Esc to return to the Bluetooth menu.
  • Make sure the Bluetoothaudio device you want to connect to is in pairing or discovery mode.
  • Select Search Bluetooth Device and pressEnter to display a list ofavailable devices.
  • Select the device you wantto connect to and press Enter.
  • Press the Esc button to return to the previous screenor the Menu button to exit themenu.
  • Read Also: Can Bluetooth Give You Brain Cancer

    Why Won’t My Bluetooth Speaker Connect To My Pc

    There are plenty of reasons why your Bluetooth speaker won’t connect to your PC. However, there are a couple of steps you can take to resolve the issue.

    While this sounds extraordinarily basic, try turning the Bluetooth device off and on again, as well as restarting your computer. You can also try un-pairing and re-pairing your Bluetooth speaker if you already had it connected to your computer previously.

    Put The Headphones Or Speaker Into Pairing Mode

    Can this Bluetooth speaker connect to my PC with USB audio? More info ...

    Putting the headphones or speaker in pairing mode, makes it discoverable by the computer.

    The steps to enter pairing mode may vary depending on the device you want to connect. However, most of the time, all you need to do is press and hold the power button for seven seconds.

    Note: power

    If model-specific instructions are needed, check your productmanuals.

    You May Like: Best Bluetooth Transmitter For Plane

    Connecting Bluetooth Speaker With Phone

    Connecting the mobile phone with a Bluetooth speaker needs some effort. It is because it is a tricky procedure to make a connection with both devices. To enjoy music in a picnic or get together by connecting both devices need little focus. To connect the speaker with your phone, follow the steps given below

  • In the mobile go to settings
  • Now click on Bluetooth icon
  • Turn it on
  • Check the list of available devices
  • If your device does not appear to check that your speakers are on. If not, then switch on it.
  • Your speakers name will appear on the list. Click on it to pair both devices.
  • It is a simple way to connect both devices and to enjoy the music of your choice.

    Troubleshoot A Pairing Failure

    When it works, pairing Bluetooth speakers and a laptop is a simple process, but sometimes things don’t go smoothly. Here are a few simple fixes that might help:

    • Confirm that the speakers are turned on.
    • Use the pairing technique recommended in the documentation.
    • Turn Bluetooth off and on again on the laptop.
    • Position the speakers within five feet of the laptop.
    • Fully charge the laptop and the speakers .
    • Move away from the Wi-Fi router, which can interfere with the connection.
    • Turn both the laptop and the speakers off and back on.
    • Remove any obstructions between the speakers and the laptop.

    You May Like: Best Bluetooth Bathroom Exhaust Fan

    Turn On Your Bluetooth Speaker

    Turn on your speaker. When you buy a new Bluetooth speaker, it always starts in pairing mode. This setting is required to find your smartphone.If you’ve connected the speaker to another device before, you’ll need to activate this mode manually. In many cases, you can do this by pressing and holding the power button. In some cases, the speaker has a separate Bluetooth button. When in doubt, you can check the speaker’s manual.

    Is Bluetooth Is Enabled On Your Phone

    How to Connect a Bluetooth Speaker To Your TV – Sony

    Make sure that your smartphone’s Bluetooth functionality is enabledthe option can be found in your phone’s quick settings tray/control center or its settings menu.

    It may seem obvious, but a smartphone with its Bluetooth radio disabled is often the culprit of a failed connection. It’s especially easy to accidentally flip the ol’ Bluetooth switch on iPhones and Android phones whose control centers and quick settings menus appear with simple swipes.

    Alternatively, your phone’s Bluetooth and WiFi radios may technically be activated, but the phone itself could be set to airplane mode, which automatically disables the phone’s wireless signals.

    In order to rule out any potentially broader issues, the first thing you should do is check your smartphone’s Bluetooth status.

    Recommended Reading: Bilt Techno 2.0 Sena Bluetooth Evolution Modular Helmet

    Determine Which Pairing Process Your Device Employs

    The process for pairing devices can vary. Sometimes, for example, it involves tapping a code into your phone or computer. Other times, you can just physically touch your phone to the device you want to pair it with .

    If youre not sure how to pair a device, refer to its user guide you can usually find one by searching online.

    How Do I Play Music From My Pc To A Wireless Speaker

  • Your network can be accessed by the speaker and PC.
  • You can access the network by tapping the NETWORK button
  • You can start your PC by right-clicking on its Start screen.
  • You can play Windows Media Player by selecting it.
  • You can play a song by right-clicking or pressing it.
  • Go to the menu and select .
  • Also Check: Bluetooth Adapter For Your Car

    Delete A Device From A Phone And Rediscover It

    If your phone sees a device but isnt receiving data from it, sometimes it helps to start from scratch. In iOS settings, you can remove a device by tapping on its name and then Forget this Device. In Android settings, tap on a devices name, then Unpair.

    If you’re deleting the device from your car, you may need to turn off your car after deleting the device, open and close the car door, and wait a couple of minutes before trying to pair the device again.

    After removing a device, start at step 1 on this list.

    How Do I Update Bluetooth Drivers Windows 10

    How to connect wireless bluetooth speaker to your phone

    Method 3. Update Your Bluetooth Drivers to the Latest Version Press the Windows + X keys on your keyboard. From the context menu, click on the Device Manager option. Expand the Bluetooth menu by clicking on the arrow next to it. Right-click on your Bluetooth adapter listed in the menu, and then choose Update Driver.

    You May Like: How Do I Use Bluetooth

    How To Make Your Portable Bluetooth Speakers Discoverable

    If you want to connect your portable Bluetooth speaker to a laptop or computer, you need to ensure that the speakers are discoverable. With the majority of devices, this will require you to hold the Power button or the Bluetooth button for about five seconds. Doing this will set the device into pairing mode.

    When the Bluetooth LED blinks, this means the portable Bluetooth speakers are ready to be paired to your computer or laptop. If you dont see the LED blinking, you may have to seek further instruction and help from the original documentation that came with the device or inquire at the manufacturers website.

    Tiny Receiver Huge Possibilities

    Bluetooth receivers pair with any Bluetooth-enabled device, allowing you to stream everything, from anywhere, to your very non-portable speakers. Its so cheap and easy, youll wonder why you didnt think of it before.

    We decided to test out the Nyrius Songo wireless Bluetooth receiver, which can be had for as little as $25 on Amazon. We dont recommend this particular receiver over any others, were more interested in the ease and viability of this type of solution. We recommend you do a little research before making your own purchasing decisions.

    The actual receiver is pretty tiny, in fact, its smaller than a standard square Post-it® note.

    Bluetooth receivers can come with a variety of outputs and features depending on your needs. Some might have optical audio connections, others sport RCA plugs for left and right channels. You can pair via Bluetooth, or for a little more money, some models come with NFC for instant tap-to-pair abilities.

    This receiver is pretty barebones, though it doesnt really need to be fancy. A simple LED on the front tells us when it is paired to a device. On the back is a 5V USB power connector, and a 3.5mm stereo output.

    The setup is simple. Plug the device into a power source, connect it from the audio out directly to your speakers audio cable or an auxiliary input.

    With that done, the only thing left to do is to pair it. This particular model can store up to eight different audio sources.

    Read Also: Bluetooth Radio For Car Touchscreen

    To Pair A Bluetooth Keyboard Mouse Or Other Device

  • Turn on your Bluetooth keyboard, mouse, or other device and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufactur’s website to learn how.

  • On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device> Bluetooth. Choose the device and follow additional instructions if they appear, then select Done.

  • Not All Wireless Devices Use Bluetooth

    How to Connect Bluetooth Speaker to Laptop

    Keep in mind that not all wireless devices use Bluetooth. Alternatives include the Wireless Gigabit specification, Wireless HD, ANT+, ZigBee, NFC as well as Wi-Fi Direct. These other technologies typically wont work with your phone, tablet or PC without some kind of additional hardware.

    We hope this guide has helped you with your Bluetooth pairing problems. If you know of any tip we’ve missed, share in the comments below!

    Don’t Miss: Best Bluetooth Shower Head Speaker

    Make Your Bluetooth Speakers Discoverable

    To connect Bluetooth speakers to any laptop, make sure the speakers are discoverablethat is, set them to pairing mode. Typically, you’ll press and hold the power button or the Bluetooth button for about five seconds. When the Bluetooth LED blinks, the speakers are ready to be paired with the laptop according to the steps below.

    If you don’t see the blinking LED, consult the documentation that came with the speakers, or go to the manufacturer’s website for specific instructions.

    Why Is My Bluetooth Speaker Connected But Not Playing

    This can be caused by a faulty or weak Bluetooth network. The speaker must be unpaired first before it can be paired with the Bluetooth device again. Restart the speaker, then pair it with the Bluetooth device again. It is likely that you will need to completely uninstall your devices if the issue persists.

    Recommended Reading: What To Look For In A Bluetooth Speaker

    How To Connect Bonaok Karaoke Microphone To Bluetooth Speaker

    Bonaok is a microphone used for karaoke. To connect your bonaok karaoke microphone with a wireless speaker you can use an XLR cable.

    Some Bonaok Karaoke Microphones

    Connect one end of this three-pin connector with the microphone and the other end of the cable with the Bluetooth or wireless speaker.

    You can also connect your bonaok karaoke with the mobile and then pair it with the speaker.

    For connecting it with your mobile either iPhone or Android you can download an app called bonaok karaoke microphone which will facilitate the connection between your mic and the Bluetooth speaker.

    Remove Old Bluetooth Connections

    How To Connect Dell Computer To Bluetooth Speaker

    If you’re having trouble pairing your phone with the speaker, it could be because the speaker is trying to connect with another phone, laptop or tablet. Some older speakers and headphones are very simple they just try to connect with the last thing they paired with. If your headphones or speaker were previously paired with another phone, laptop or tablet, turn off that other device or Bluetooth. And if you are no longer planning on using your headphones or speaker with that device, unpair it to prevent future issues. In iOS settings, you can remove a device by tapping on its name and then Forget this Device. In Android settings, tap on a devices name, then Unpair. After removing a device, start at step 1 on this list.

    Some speakers and headphones can store pairing for multiple devices. However, there is a limit to the number of devices’ pairing information that they can store. If you’re having trouble pairing headphones or a speaker that have been paired to many devices in the past, you may need to reset your headphones or speakers to clear out all of the pairings so you can start fresh. Search “reset” and your device name for instructions from the manufacturer on your specific model.

    Don’t Miss: Best Bluetooth Mouse No Usb

    How To Connect To Bluetooth Speakers On A Mac

    The steps for connecting with a laptop running OS X or macOS are similar to connecting a peripheral on Windows.

  • In the Apple menu, click System Preferences. Or, go to the Dock and select the System Preferences icon.

  • In the System Preferences window, select Bluetooth.

  • In the Devices list, select the Connect button for the Bluetooth speakers.

  • When the Bluetooth speakers are paired, they show as Connected.

  • Use Homepod Stereo Pair

    Apple has a similar feature to Samsung’s Dual Audio called HomePod Stereo Pair that allows users to pair an iPhone or Mac with two HomePod speakers.

    To set up a HomePod Stereo Pair, you need an iPhone running at least iOS 11.4 or a Mac with macOS Mojave or later. You’ll also need HomePod speakers running iOS 11.4 or later.

    When you set up a HomePod in the same room as another one, you’ll get an option to use the speakers as a stereo pair. You can also use the Home app to set up this feature on an iPhone, iPad, iPod touch, or Mac. In either case, both HomePods must be in the same room to pair them.

  • Open the Home app, double-click or press and hold HomePod, then click or tap Settings.

  • Click or tap Create Stereo Pair.

  • Select a second HomePod.

  • You’ll see two HomePod icons in the app. Tap or click a HomePod to map it to the correct channel .

  • Click or tap Back, then Done.

  • Need more speakers to connect and make your home a music mecca? There are plenty on the market these days definitely shop around to get the best deal but be sure you’re also getting volume and fullness of the music you want, too.

    You May Like: Where Can I Buy Bluetooth Earbuds

    Pair A Speaker To Your Tv Using Bluetooth

    While we do make great Soundbars that pair perfectly with your TV, perhaps you already have a wireless speaker you’d like to listen through. Generally speaking, connecting an audio device by Bluetooth is usually a last resort. It’s often better to use Wi-Fi or even a wired connection like Digital Audio Out or HDMI for your audio if your device supports it. Bluetooth can save you some wires and hassle, though.

    The A2dp Avrcp & Bluetooth Audio Codecs

    How to Connect/Pair your Bluetooth Speaker/Headphones to your Computer/Laptop on Windows 10

    The Advanced Audio Distribution Profile is the Bluetooth standard profile for the transfer of high-quality stereo audio signals.

    This profile is used between an A2DP source and a recipient. In the case of this article, the recipient is the Bluetooth speaker, but it can also be a BT headphone, car stereo system, or another Bluetooth-enabled playback device.

    A2DP allows for 2-channel audio transfer. It has mandatory support for the low-complexity SBC codec and many other codecs to transfer audio effectively.

    A codec is a device or program used to encode and/or decode a digital data stream or digital signal.

    Digital audio is simply a digital representation of analog audio .

    Digital audio can be stored in a wide variety of file formats. It is the codecs that are required to encoded and decoded these files. Codecs can effectively reduce the storage space and the bandwidth required for transmission of the stored audio file.

    So while the mp3s, .wavs, FLAC, or other audio files on your audio device could certainly be used as the digital modulating signals in Bluetooth wireless transmission, they are actually encoded according to one of the A2DP standard codecs before being transmitted wirelessly.

    SBC compresses the audio signals, and so it always worsens the quality. However, the loss is barely perceptible with a high data transfer rate of up to 345 kbps and a perfected algorithm.

    Other A2DP codecs include:

    • aptX
    • aptX HD
    • AAC
    • LDAC

    Also Check: Polaroid Bluetooth Speaker With Lights

    Popular Articles

    Related Stories