How To Connect My Bluetooth To My Phone

Ihome Bluetooth Speaker Pairing Problems And Troubleshooting

How To Pair Bluetooth On Android

After following the steps above, if youriHome Bluetooth speaker is not pairing with your device, or you are not getting any sound through the speaker, here are some basic troubleshooting steps:

  • First, make sure the iHome Bluetooth speaker is in range
  • Make sure the speaker is fully charged, turned on and discoverable
  • Make sure Bluetooth is turned on on your computer, phone or other master device
  • Make sure volume is turned up at least enough to hear
  • Make sure that you are actually playing music on the computer or other device, and that if the devices music player has a volume control it is also turned up
  • Make sure no other Bluetooth master devices are paired with and playing music to the speaker
  • If its still not working, turn your computer, phone or tablets Bluetooth off and on and, if necessary, restart it and/or your iHome Bluetooth speaker

Is Your Phone Discoverable

Even if Bluetooth is turned on, your phone itself might not be discoverable. This means that a Bluetooth device you havent yet paired cannot see your phone.

To make it visible to other devices, open the main Bluetooth settings. On Android, phones remain discoverable so long as you stay on that screen.

On an iPhone, your phone will be discoverable when Bluetooth is turned on. It will search for Bluetooth devices available for pairing when you go to Settings > Bluetooth.

Pairing Your Ihome Speaker With An Apple Iphone Or Ipad

  • First, turn on your iHome speaker system by holding down the power button until you hear a tone
  • Turn the iHome iDM12 to Bluetooth mode by sliding the switch from aux to Bluetooth
  • Make sure the iHome iDM12 is within range of the Apple device 30 feet or less
  • Next, turn on Bluetooth on your iPhone or iPad. Go to Settings > > Go to Bluetooth > > Press Bluetooth to turn on.
  • Now, on your iHome speaker, turn the Bluetooth signal on by pressing the Play, Pause, Pairing button and holding for 2 seconds. You will hear a double-beep, and an amber light will flash on the front of the speaker
  • Go back to your Apple and you should now see iDM12 on the screen. Press on it to pair. If you are asked for a password, enter 1234.
  • The amber light on your iHome iDM12 should stop flashing and turn to green, indicating that it is paired with the iPhone or iPad. Some iHome speakers may have a voice announcing that the devices are paired.
  • Apple should also indicate that the two devices are paired
  • Play music!

Please note that after this initial pairing procedure, the iHome iDM12 will automatically pair with the device every subsequent time you turn it on. If it ever fails to do so, make sure the speaker is fully charged, the Apple is charged and turned on, and they are in range. If the automatic pairing still doesnt occur, follow the steps above to re-pair the devices.

Recommended Reading: How Do I Install Bluetooth

Landline Phone Without 25mm Port:

If your landline phone doesn’t have a headset port, you’ll be required to manually pickup, and hang up your phone handset to answer/end calls with your wireless landline headset. Most customers add a Handset Lifter to go with their wireless headset, so you’re able to answer/end calls when away from the phone.

That means, when there’s an incoming call and you’re away from the desk, you don’t have to run back to the phone, or if you’re at the phone, you press the on button on your headset to be on a call. Rather than having to physically pick up your handset, then hang it up when done.

  • Plug in the AC power to the wall outlet, then plug the other end into your headset charging base.
  • Unplug your landline phone handset from the base of your telephone, then plug the other end into the back of your charging base with the symbol of a handset.
  • Connect the included RJ9 phone cord to the back of your wireless phone headset charging base.
  • Plug the other end of the RJ9 phone cord into the base of your landline phone where the handset would normally plug into.
  • Which Method Is Best

    Why Is My Bluetooth Not Connecting To My Phone

    If youre not sure whether to connect via USB or Bluetooth, the answer may depend on your preferences. If you have a large number of files to transfer, USB is the fastest method. Its also the most secure because its a direct connection. Bluetooth is relatively secure, but it has the potential for being accessed by outsiders.

    If you don’t have a USB cord or want to quickly cast a screen or send a smaller file or two, Bluetooth is sufficient. It’s not a good option for working between Apple and PC devices, because Apple has designed their products to work best with other Apple devices. All of the workarounds for this issue involve using third-party software solutions that typically cost money.

    Of course, if you back up your phone to the cloud regularly, for instance to Dropbox or Google Drive, you can also avoid connecting your phone to your computer altogether. Simply download the files you want from the cloud backup to your computer. It’s an extra step but it eliminates compatibility issues for people working between Apple and PC devices.

    Don’t Miss: How To Make Your Bluetooth Louder

    To Pair A Bluetooth Device Using Swift Pair

    Swift Pair in Windows 11 lets you quickly pair a supported Bluetooth device with your PC. If the Bluetooth device supports Swift Pair, youll receive a notification when it’s nearby and you put it into pairing mode to make it discoverable.

  • Turn on a Bluetooth device that supports Swift Pair and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufacturers website to learn more.

  • If this is your first time using Swift Pair, select Yes when asked if you want to get notifications and use Swift Pair.

  • When a notification appears that a new Bluetooth device was found, select Connect.

  • Before you start, make sure that your Windows 10 PC supports Bluetooth. For more info on how to check, see Fix Bluetooth problems in Windows 10. If you need help adding a device without Bluetooth capabilities, see Add a device to a Windows 10 PC.

    How To Set Up Bluetooth In Your Honda

    Bluetooth wirelessly connects your mobile device to your Honda multimedia system allowing you to perform handsfree calls, music streaming, and turn-by-turn navigation. AutoNation Honda O’Hare is here to help with a step-by-step guide on how to pair your mobile device to your new Honda multimedia system with Bluetooth.

  • Make sure Bluetooth is activated on your mobile device.
  • On your Honda multimedia screen, press the Home button at the top left.
  • Press “Phone”, then press “Yes” to confirm. You will then be prompted to add a new device, tap “Yes”. Select your mobile device from the multimedia screen.
  • On your mobile device, select HandsFreeLink® fron the Bluetooth menu. The two will now begin pairing.
  • Your mobile device and Honda multimedia system are now connected via Bluetooth and HandsFreeLink®.
  • For more information on your HandsFreeLink®, or how to pair your devices with Apple CarPlay or Android Auto, please feel free to contact us to speak with a knowledgeable team member.

    Recommended Reading: Best Long Lasting Bluetooth Earbuds

    How To Connect Your Phone To A Computer Using Bluetooth

    Need to connect your phone to a computer using Bluetooth? Learn how to set up a Bluetooth connection and transfer files.

    Bluetooth is a short-range wireless technology that makes it easy to connect devices and transfer data between them. Most PCs and almost all phones have Bluetooth capabilities. It’s fast, reliable, and battery-efficient.

    If you haven’t used it much in the past, you’re missing out. Let’s see how to connect your phone and Windows PC using Bluetooth.

    How To Pair My Jabra Bluetooth To My Iphone

    How Do I Connect My Bluetooth To My Phone?

    When the Bluetooth indicator flashes red and blue, press and hold the Multi-function button for five seconds to enter pairing mode. After the headset has been connected, it will announce the pairing mode. You can pair the Jabra Step Wireless by selecting it from the list of available devices in the Bluetooth menu on your mobile device.

  • 14. how do i reset my jabra elite 65t case?
  • You May Like: Dexcom Not Connecting To Bluetooth

    How To Remove Anyone From Your Bluetooth Devices

    If your neighbor connects his or her Bluetooth device to your speaker often, it can be very upsetting. You may try to remove them, but you will realize that it is rather tricky. Even if your switch your speaker off, it will reconnect the moment you turn it on. The reason is that Bluetooth devices are programmed to reconnect automatically to the last device connected.

    However, do not fret because we have a solution to this problem. There is a simple trick that some people think works. Just follow these steps:

    Landline Phone With 25mm Port:

    Not all landline phones have a 2.5mm port. If yours does and you want to be able to press a button on your phone to answer/end calls, add the extension cord to go with your wireless landline headset.

  • Connect the extension cord to your landline phone.
  • Plug in your AC power adapter to the wall, then connect the other end into your wireless phone headset charging base.
  • Included with your wireless phone headset is an RJ9 cord. Plug one end into your headset charging base, then plug the other end into the HA10296 adapter.
  • Your headset is setup and ready to be used!
  • Using your wireless headset: Remove your headset from the charging base, then press the headset button on your office phone to answer/end calls.

    You May Like: Best Bluetooth Home Theater Receiver

    How To Connect A Smartphone To Vw Bluetooth: Step

    Before starting the pairing process, be sure to confirm that your phone is compatible with your VW model at Then, complete the following steps:

  • Turn your VW on. The Volkswagen Bluetooth® system will be in “discovery” mode.
  • On your phone’s Bluetooth® menu, search for new devices. Select “VW BT” with the last four digits of your VIN.
  • You’ll then see a connection request on your car’s infotainment system.
  • Select “Connect” on the infotainment screen. It will then display a PIN.
  • Once you’ve confirmed that the same PIN is shown on your phone, press “YES” on the screen. Then, select “Pair” on your phone. The VW Bluetooth® pairing process must be completed withing 30 seconds of the PIN being displayed any longer, and you’ll need to repeat the process.
  • And that’s it! Your smartphone is now connected to your vehicle via VW Bluetooth®. When you want to pair other phones with your car or SUV in the future, simply confirm that Bluetooth® is enabled on your device and complete the following process:

  • Press “Setup” on the infotainment display.
  • Press “Bluetooth.”
  • Press “Results.” Select your device.
  • You’ll have two device profile options: “Handsfree” or “Bluetooth® Audio.” Choose one.
  • After confirming that the same PIN is shown on your phone, press “Yes” on the infotainment screen. Select “Pair” on your phone.
  • Repeat this process to connect up to four phones or other smart devices to your Volkswagen.

    To Pair A Bluetooth Headset Speaker Or Other Audio Device

    How to Connect a PC to a Phone (with Pictures)
  • Turn on your Bluetooth audio device and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn how.

  • On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Choose the device and follow additional instructions if they appear, then select Done.

    Your Bluetooth device and PC will usually automatically connect anytime the two devices are in range of each other with Bluetooth turned on.

  • Note: Not seeing your Bluetooth audio device? Learn how to fix connections to Bluetooth audio devices and wireless displays.

    Read Also: Bluetooth Headphones With Mic Reviews

    View A List Of Discoverable Devices Nearby

    RELATED:How to Add Bluetooth to Your Computer

    Now, go to the smartphone, tablet, computer, music player, or whatever other device you want to connect the Bluetooth accessory to. Look for the Bluetooth settings or devices screen. This screen will display a list of nearby Bluetooth devices that are in discovery mode as well as devices paired to the device.

    Be sure the Bluetooth hardware on your device is actually enabled. Youll often see a toggle in the Bluetooth settings area.

    For example, heres how to do this on popular operating systems:

    Clear The Bluetooth Cache

    Sometimes apps will interfere with Bluetooth operation and clearing the cache can solve the problem. For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices then restart your phone or tablet.

    Don’t Miss: Sena Momentum Bluetooth Motorcycle Helmet

    Connect Through Bluetooth On Your Android Device

    You can use Bluetooth to connect some devices to your phone without a cord. After you pair a Bluetooth device for the first time, your devices can pair automatically. If your phone is connected to something through Bluetooth, at the top of the screen, you’ll see a Bluetooth icon .


    What Is Bluetooth Pairing

    How to Connect Your Phone to Your Car Via Bluetooth

    Simply put, pairing is connecting your Bluetooth speaker to a computer, smartphone, or tablet, or to any other master device, so that they can communicate wirelessly with each other.

    Pairingis quite simple to do, but having clear and specific instructions on how to pair a Bluetooth speaker to a computer, phone or tablet can make the process much easier.

    Recommended Reading: How Do Bluetooth Speakers Work: A Simple Guide

    Read Also: Best Noise Cancelling Bluetooth Neckband Headphones

    Connect Your Iphone To Your Car Using A Lightning Cable

    If you can connect your iPhone to your car via Bluetooth, most of the time you can also connect them using a Lightning cable . Though its frustrating that Bluetooth wont work, you can usually get all of the same functionality from a wired connection. If your car has Apple CarPlay, you wont lose any app integration by connecting your device to your car with a Lightning cable rather than connecting your iPhone to car Bluetooth.

    How Can You Protect Your Privacy

    There are several ways to prevent this from happening. If you are using a Bluetooth speaker, switch it off whenever you stop using it. If your Bluetooth is off, it is undiscoverable.

    Using Bluetooth reduces your privacy levels. If you live in an apartment, your neighbors are in close proximity all the time. If you leave your Bluetooth device on, you may find out that your neighbor was connected. It is as terrible as it sounds and completely disgusting!

    Some of the devices that your neighbors may connect to are smartwatches, lighting systems, personal computers, mobile phones, laptops, Bluetooth speakers, Bluetooth-enabled televisions, and Bluetooth earbuds and headphones.

    READ MORE! Is it OK to leave Bluetooth on all the time?

    Don’t Miss: Note 9 Stylus With Bluetooth

    Pair A Bluetooth Device In Windows

    You can pair all kinds of Bluetooth devices with your PCincluding keyboards, mice, phones, speakers, and a whole lot more. To do this, your PC needs to have Bluetooth. Some PCs, such as laptops and tablets, have Bluetooth built in. If your PC doesnt, you can plug a USB Bluetooth adapter into the USB port on your PC to get it.

    Before you start, make sure that your Windows 11 PC supports Bluetooth. For more info on how to check, see Fix Bluetooth problems in Windows. If you need help adding a device without Bluetooth capabilities, see Add a device to a Windows PC.

    Put An Accessory Or Device Into Discovery Mode

    Connecting bluetooth headset to windows 7

    RELATED:More Than Headsets: 5 Things You Can Do With Bluetooth

    To save battery power, a device with Bluetooth isnt constantly broadcasting that its available. Even if you have a Bluetooth-enabled accessory near a Bluetooth-enabled device, they wont be able to see each other until you put them into discovery mode. The device will then be discoverable by other devices for a few minutes.

    First, put the accessory you want to use into discovery mode. The exact way you do this depends on the accessory. If you have a headset, you may need to hold a button down on the headset for several seconds until a light starts flashing. A keyboard or mouse may have a similar button you may need to press or hold down. A speaker may have a Bluetooth button on its remote that puts it into Bluetooth discovery mode. Others may go into discovery mode by default after you turn them on. A light may flash to indicate that the device is in discovery mode. Itll only stay discoverable for a few minutes.

    Not sure how to put your accessory into discovery mode? Consult its manual, check the manufacturers website, or perform a web search for instructions.

    Note that you dont need to make a device discoverable if youll be connecting from it. You only need to make a device discoverable if youre connecting to it. For example, lets say you wanted to connect a headset to your Android phone youd just need to make the headset discoverable, and not the Android phone.

    You May Like: Can I Bluetooth My Phone To Tv

    How To Connect A Phone To Your Computer

    Do you want to display your phone screen on your laptop screen? Would you like to transfer photos from your iPhone to your computer hard drive? These tasks require a connection between the two devices, and the process is actually rather simple and straightforward. Heres what you need to do to perform this useful hack.

    Popular Articles

    Related Stories