How To Hear Songs In Bluetooth Headset

Why Is Music Not Playing On My Bluetooth

Avantree How to – Stream music to Bluetooth Headphones from Windows 7 8 computer (Audition Pro)

Your Bluetooth may be turned off. The easiest way to check if it is on is to check the top of your screen. Bluetooth symbol should be present if Bluetooth is turned on. If it is not there:

  • Go to Settings > Connections > enable Bluetooth. Enabling media audio should also make it possible for your headphones to play music on YouTube.
  • Pair your device with your headphones. This can be done by using a code that you feed into your phone to confirm pairing or you can lightly tap your headphones and device together to establish a connection. Scan for available devices then tap on the device you want to pair with.
  • Remove any devices which are connected to your Bluetooth that you no longer use these connections may be overwhelming your device.
  • If your headphones are wireless, they should be close to your device, about 5-6 feet to allow for an uninterrupted connection.
  • If the problem persists, you can switch your phone off and then back on to reset it.
  • Switch Between Iphone And Bluetooth Speaker During Calls

    If youre using it in a noisy place, it is possible the person on the other end may have a problem hearing you due to average mic quality. In that case, if you want to switch from Bluetooth speaker to iPhone, you can do it directly from the dialer screen.

    While on call, tap the audio button select iPhone from the options.

    Signing Off

    Routing calls from iPhone to your Bluetooth speaker is just so simple. If it has a good built-in mic then you will love attending calls. If not, you might want to reset your Call Routing settings again. What you do think about it, tell us in the comment section below!

    You would like to read these posts as well:

    Bluetooth Connections Are Still Unreliable

    The headset sometimes disconnects from the PC, even while Im sitting a few feet from the computer. Fixing this required powering off down the headset and turning it back onin other words, rebooting my headphones.

    When the connection came back online, some applications worked fine and some didnt.

    I was talking to someone in a voice-calling application when the headphones lost the connection, and that application immediately ended the call because the audio device had vanished. I had to start the call again after rebooting my headphones. So, not only is Bluetooth audio potentially flaky, but many Windows applications cant gracefully handle that flakiness.

    For the most part, Ive had a solid connection with AirPods that use Apples W1 chip while connected to an iPhone. But a standard Bluetooth headset with a Windows PC just doesnt seem as reliable.

    Microsoft is working on easy pairing for Bluetooth devices, which is nice, but that wont help much if the device still loses the connection while its paired.

    RELATED:The Best Bluetooth Speakers of 2021

    Also Check: What Is The Best Bluetooth Amplifier

    Check Your Volume Levels

    A quick check on the system tray to see if theres adequate volume pumping out of your PC should be one of the first things you do when troubleshooting this kind of problem. Here are the steps:

  • You likely have more than one playback device so make sure to select Bluetooth headphones from the list. Adjusting Windows Volume via System Tray
  • Adjust the volume accordingly by raising the slider to the right.
  • Alternatively, you can simply hit the Increase Volume button on your keyboard. Its usually placed along with the function keys.
  • Play Music Through Bluetooth Headset

    Wireless Music Bluetooth Stereo Earphones

    usng bt headset with htc wizard with fafio crossbow

    zcink said:Here is a .cab file that does what you want it to do.First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.Enjoy !!!

    Bluetooth Audio

    Don’t Miss: Classic Car Hidden Bluetooth Radio

    How To Fix Bluetooth Headphones Connected But No Sound In Pc

    There are several possible reasons why you dont hear any sound from your headphones when its connected to your PC via Bluetooth.

    The following are some of the most common scenarios and their corresponding fixes so you can get your Bluetooth headphones up and running again.

    How To Play Music Through Speakers While Using Headphones

    With a few quick fixes, you can easily send music to your speakers and headphones at the same time.

    Is it possible to play music through speakers while using headphones at the same time?

    It may sound like a problem best left for audiophiles, but its actually not difficult to share music or videos between two or more people using different devices.

    In fact, there are a few ways to play sound via headphones and speakers simultaneously without tearing your hair out trying to figure it out.

    Whether youre using a PC or a Mac, there are a few different things you can do to make dual listening possible with speakers and headphones.

    The methods we mention below are also useful if you want to play music through two headphones at once.

    Read Also: Smart Bulb With Bluetooth Speaker

    Why Does My Phone Shut Down When I Try To Play Music On My Headphones

    Your phone shutting down every time you plug in headphones to play music may be indicative of a more complex issue.

    • Your headphones may be short-circuiting which may damage your phone. As a result, your phone may shut down to prevent any damage to your device from occurring.
    • An overloaded internal memory can also cause this problem, clear some files from your phone then switch your phone off then back on.
    • Your headphone jack may be compromised, which means that water or moisture may be present in the jack. The presence of moisture will cause your phone to shut down and prevent further damage.

    How To Listen To Music Through My Bluetooth Headset

    “How To” Listen to Music Through Your Jawbone Bluetooth Headset on ANY BlackBerry
  • Can someone please explain how I can listen to music thru my jawbone bluetooth headset?I’m sorry if this is a newbie question but I am new to android. If there is already a walkthough on here, can u link me to it? I’m on the road and don’t have time to search like I normally would.Thank you
  • slthreeThanks R1This jawbone is a couple years old so I’ve lost the manual. I guess I have to find it online.06-28-2010 11:41 AM
  • Seems like I read something that some jawbone’s didn’t have it, but some can be updated through software on the jawbone website.06-28-2010 11:56 AM
  • Can someone please explain how I can listen to music thru my jawbone bluetooth headset?You can check and see if this is an option Settings > Wireless & Networks > Bluetooth SettingsLong press your bluetooth headset > OptionsIf your headset is compatible, in addition to Phone, there should be a check box for Media.Bazz
  • Your responses have been very helpful. Bazz, Thanks for the walkthrough.Unfortunately, my Jawbone doesn’t do media.06-28-2010 05:28 PM
  • dolphn85Here is a fix if you do not have a BT that has the a2dp compatibility. If you have an android, go to the market and download the bluetooth switcher. The way this works is you connect you BT headset to the phone, then run the media programs you want , turn the volume up all the way on the media program, then go back to to the bluetooth switcher app and click the on button. You should now hear the media through your BT.12-26-2010 05:15 PM
  • Plantronics Explorer 240
  • You May Like: Best Bluetooth Stereo Speakers For Home

    How To Listen To Music Using A Bluetooth Headset

      Listening to music while you work may increase your productivity by helping you to tune out the background noise of your office. Wearing a headset at your desk also sends a “do not disturb” message to coworkers, reducing interruptions when you need to focus on an important project. It’s possible to use the Bluetooth connection in your computer to stream music or audio from a video to a Bluetooth stereo headset that supports Advanced Audio Distribution Profile .

      Step 1

      Place your Bluetooth headset in pairing mode. The procedure for doing this varies from one headset to another, so check your user manual for specifics.

      Step 2

      Right-click on the Bluetooth logo at the bottom right of your computer screen and select “Add a device.”

      Step 3

      Double-click on your headset’s device name in the search results and complete the pairing procedure. This may require inputting the PIN code for your headset. Obtain this information from the headset’s user manual.

      Step 4

      Open Windows Media Player and right-click on the “Speaker” icon, next to the volume control.

      Step 5

      Select “More Options,” and then click on the “Devices” tab.

      Step 6

      Step 7

      Select “Speakers ” in the drop-down menu. Click “OK,” and click “OK” again in the Options screen.

      Step 8

      Open the music file that you want to play. The audio should be directed to your headset. If this is not the case, you may need to close and then reopen Windows Media Player for your new settings to take effect.

      References

      How To Play Sound On Speakers And Headphones On Pc

      There are three ways to output sound to both headphones and speakers if youre using a PC.

      The fastest way is to adjust your PCs sound settings using the Control Panel.

      If this doesnt work, you can use a third-party audio mixer software to send sound to multiple devices.

      Lastly, you can use an audio splitter or Bluetooth adapter to send the audio to two or more devices.

      You May Like: Beats Bluetooth Headphones With Mic

      Having Problems Playing Iphone Music Over Bluetooth

      There are several things to check if the device has problems connecting to the iPhone or if the devices are connected but music doesn’t play over Bluetooth.

      • The iPhone doesn’t see the Bluetooth device: Move the phone closer to the device and make sure that the wireless function of the device is enabled and working.
      • Can’t hear music from the Bluetooth device: The volume on the phone must be turned up to transmit sound to the device, and the Bluetooth device needs its volume set reasonably, too.
      • The Bluetooth device is turned off. Bluetooth must remain on during the entire music streaming session. The moment you disconnect Bluetooth or walk too far away from the device, the music stops.

      Bluetooth Is Always A Few Years Away From Working Well

      Geemarc Amplified Bluetooth Headset

      So, in summary: the headsets connection is unreliable, its impossible to tell if its using the highest quality audio with my PC, and it cant function as a normal pair of stereo headphones while using the integrated microphone. And, if I connect it to my iPhone, I wont get the highest quality audio.

      Im returning the headset to Amazon. Ill stick to a wired headset with traditional analog audio cables on my computer, thanks. Ill take another look in a few years when Bluetooth 5.0 headsets are out.

      Image Credit: Anna-Marie/Shutterstock.com, Hadrian/Shutterstock.com.

      Recommended Reading: Plantronics Explorer 500 Bluetooth Headset Black

      Adjust Your Macs Settings

      The best way to play sound via speakers and headphones at the same time is to set up a Multi-Output Device via your Macs System Preferences.

      This method works whether youre using two wired or two Bluetooth devices or you have one wired and one Bluetooth device.

    • Connect the speakers and headphones to your Mac. Headphones connected to Mac
      • May have issues with volume control

      Disable Nearby Device Scanning

      This feature is used for improving GPS accuracy by allowing apps and services to scan for Bluetooth devices at any time even when Bluetooth is disabled.

      When this feature is turned on, it could make your Android phone continuously scan for nearby Bluetooth devices. This may cause your current Bluetooth headphones connection to drop, potentially cutting off any audio you were listening to.

      As a bonus, turning this feature off reduces battery consumption, too. Heres how to disable it in your Android smartphone.

    • Go to Settings, and click Location. Going to Androids Location settings
    • Turn the Location setting ON. Wi-Fi and Bluetooth Scanning options should appear. Select Improve accuracy Wifi and Bluetooth scanning on Location settings
    • On the next page, hit the toggle to turn off the Bluetooth scanning feature. Disable Bluetooth Nearby Device Scanning in Android
    • Recommended Reading: Street Bike Helmets With Bluetooth

      Set Your Default Playback Device

      One common setting that gets overlooked is the currently selected playback device. For example, you could have your Bluetooth headphones paired properly but forgot to switch the playback device option from your laptop speakers to Bluetooth headphones. This will cause Windows to still use your laptops speakers as output for sound.

      Heres how to set it up correctly for your Bluetooth headphones:

    • On the Windows Search Box, type Control Panel. Hit Enter. Go to Windows Control Panel
    • Click on Set Default. Then, hit Apply and OK. Set headphones as default playback device
    • Test if it works by playing an audio file from your PC.
    • How Do I Make Music Only Play Through Bluetooth

      Play Audio Through Bluetooth and Wired Headphones Simultaneously in Windows 10/8/7

      Tap the gear icon in the upper right corner of the notification shade to begin.Go to Sounds and Vibrations in the Settings menu.The Separate Sound App can be found at the bottom of the screen. Scroll all the way to the bottom.You can turn on this feature by tapping the toggle located in the upper right corner.

      Read Also: Best Bluetooth Receiver For Home Stereo

      Use An Audio Splitter Or Bluetooth Adapter

      If youd rather leave your settings alone, you can use an audio splitter instead. A splitter offers a plug-and-play solution. Simply plug the splitter into your PC and plug the headphones into one port and the speakers into another.

      A Y splitter lets you play sound on two audio devices. Multi-splitters have multiple ports that let you connect more than two pairs of headphones or speakers at once. Some multi-splitters also have the added functionality of letting you plug in a microphone.

      If youre using Bluetooth headphones and speakers, use a Bluetooth adapter. This works like an audio splitter for Bluetooth devices. Connect the adapter into your PCs USB port and connect the devices to the adapter.

      • Has to be connected to PC to work
      • May create sound quality problems if using a cheap splitter or adapter

      Listening To Music From A Device Connected Via Bluetooth

      You can enjoy listening to music and basic remote control operation of a BLUETOOTH device via a BLUETOOTH connection. The BLUETOOTH device is required to support the following BLUETOOTH profiles.

      • A2DP : enables you to enjoy high-quality audio content wirelessly.
      • AVRCP : enables you to adjust volume, etc.

      The operation may vary depending on the BLUETOOTH device. Refer to the operating instructions supplied with your BLUETOOTH device.

    • Connect the headset to a BLUETOOTH device.
    • Wear the headset.

      indication to the left and indication to the right. The unit of the headset has a tactile dot.

      A: Tactile dot

    • Play back music or video on the BLUETOOTH device.Adjust the volume on the BLUETOOTH device.
    • Adjust the volume by pressing the +/- buttons of the headset.

      When the volume reaches the maximum or minimum, an alarm sounds.

    • Note

      • If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operation on the headset.

      Hint

      • The headset supports SCMS-T content protection. You can enjoy music, etc., from a device such as a mobile phone or portable TV that supports SCMS-T content protection.
      • Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the BLUETOOTH device.
      • Volume during a call and volume during music playback can be adjusted independently. Changing the call volume does not change the volume of music playback, and vice versa.

      Read Also: Charge 4 Portable Bluetooth Speaker

      How Do You Play Music Through Bluetooth On Android

      To turn on Bluetooth, select the device under the menu.The Bluetooth control can be used in order to communicate with and hold things.When your smartphone and the Bluetooth device connect, the connected device shows up in the device list. Tap both connected devices, then tap a paired unconnected device.

      Windows Wont Tell You If Its Using Aptx

      Hoco e49 singe business bluetooth wireless headset car phone handsfree ...

      Bluetooth is confusing. As audio website Darko.Audio puts it: Bluetooth audios dirty secret is not that it doesnt sound very good, its that it will only sound good if certain conditions are met.

      Modern high-end Bluetooth headsets support AptX, an audio codec compression scheme that offers better sound quality. But AptX is only enabled if its supported on both the transmitter and receiver. When using a Bluetooth headset with a PC, it only works if your PCs hardware and drivers are compatible.

      Other configuration issues may also disable AptX audio. As Darko.Audio explains, on a Mac, if youre using 2.4 GHz Wi-Fi, if you have more than two Bluetooth devices connected to a desktop, or if you have more than one connected to a laptop, macOS drops down to lower-quality SBC audio over the Bluetooth Advanced Audio Distribution Profile connection. Thats according to Apple.

      Windows 10 now has integrated support for AptX, but its impossible to tell if your Bluetooth connection is actually using AptX. Android and macOS let you see this information, but it isnt visible anywhere in Windows. So youll never know if youre getting the highest sound quality possible.

      RELATED:What’s the Difference Between Bluetooth A2DP and aptX?

      Don’t Miss: Bluetooth Big Mouth Billy Bass

      Why Is My Bluetooth Connected But Not Playing Music

      The speaker must be paired with the device before the problem can be worked on. Unpairing the device will make things work. Restart the speaker, then try pairing the device again.You must delete all settings from your devices if the issue persists.Your smartphone or computer should be turned off from time to time with the Forget devices button.

      Popular Articles

      Related Stories