How To Make Bluetooth Headphones Louder On Android

Speaker And Headphone Volume Boosters Are Part Of The Solution

Make Your Android Bluetooth Audio Volume LOUDER
  • Northwestern University
  • Western Governors University

If your Android phone’s volume is too low, or the sound is completely muted, you can try several ways to fix your phone’s speakers or headphone. There could be a few reasons why your Android phone’s sound isn’t working.

Instructions in this article apply to phones running Android 7.0 or later. All steps are the same regardless of your carrier or who made your phone.

What Causes Headphones To Be Unbalanced

Often, the issue lies with one of your audio channels, where the signal is transported from the audio source to the speakers. The signal is split between the left and right channel of the headphones, which usually results in the same amount of sound for both speakers.

However, when there is a deficit in the flow of this signal, this gives the impression that your headphones are unbalanced.

Most headphones work by using either mono or stereo audio channels. Mono means one, with the signal being sent using only one channel. Stereo, on the other hand, uses two different channels with respective sounds sent to the left and right channels.

When one channel is over- or under-utilized, sounds are split between the channels and this gives the impression that your music is unbalanced.

Unbalanced audio channels can be due to the following reasons:

  • Unbalanced audio channels can commonly occur from altered equalizer settings. When more current is directed to one speaker over another, frequencies are compromised and the effect is a seemingly unbalanced audio experience.
  • Computers have specialized sound effects that are programmed to alter the perception of music coming from the sound card. These are found in the Control Panel and emphasise either a mono or stereo sound effect.

If youre curious as to whether your headphones are in sync with your devices channels, use this helpful left / right stereo test to check their sound balance.

Use A Bluetooth Speaker Instead

Perhaps you don’t want to wear your headphones all the time just to increase your phone’s volume. That’s where Bluetooth speakers come in.

If you’re looking for how to increase the volume of Android phones at home or other places without using your headphones, you should consider getting a Bluetooth speaker instead. These speakers can boost your phone volume than you ever expected, and they come in different sizes and qualities, based on your needs and pocket size.

You can get a Bluetooth speaker from nearby stores. And if you want something with more features , consider getting a smart speaker.

As you can see, there are various methods on how to increase the volume of Android phones. While smartphone speakers are getting louder these days, chances are it never gets to your taste.

Most times, all you need is just to raise the volume a bit or turn on a specific feature on your device settings. And sometimes, your phone speaker cant produce more than what youre currently hearing. So, you need to find another means on how to increase volume on Android.

Hopefully, there are tons of headphones and Bluetooth speakers to fill the space. And if you’re looking for affordable headphones, earbuds, or speakers, Oraimo is one of the best brands to try out. Visit any Carlcare store near you to get one!

You May Like: Does Nissan Rogue Have Bluetooth

Disable Volume Limitations On Your Phone

Smartphones can have volume limit tools to help protect your hearing. When it comes to Androids, some have it while others do not. If you’re using a Galaxy or any other relevant device, you can go into your Sounds and Vibrations menu, select the Volume option, and then adjust the Media Volume limiter. From here, you can toggle the setting off if a limit was previously set.

Apple’s “Volume Limit” feature also has to be enabled and disabled. Here’s how you do it.

1. Go to the Settings app on your iPhone.

2. Use the search bar or scroll for “Music.”

3. Scroll down to the volume limit.

  • Note: You’ll be able to see if “Volume Limit” is on or off.

4. Once disabled, slide the knob to the end to increase volume.

Apple also created the Sound Check feature that, when enabled, plays your music at a consistent level, regardless of how loud the sound file is. It’s only applied to downloaded songs or ones streamed through Apple Music and can be found within the Music menu of the iPhone’s settings app.

How To Increase Bluetooth Headset Volume For Your Phone

How to Make Headphones Louder On Android Phones ...

The trend among smartphone manufacturers of removing the 3.5mm headphone jack of their devices is forcing most consumers to consider using Bluetooth headsets. Most of these headset brands have powerful audio capabilities however when they are used on Android devices their full potential is not being enjoyed. The volume control of bluetooth devices will only control the media volume of the Android device itself and not the Bluetooth headset. This means that you wont be able to get the maximum volume level of the headset.

There is however a way to increase the Bluetooth headset volume of your phone. This should work for devices running on Android Nougat and above.

The first thing you will need to do is to enable the developer options on your device. To do so, head over to System About phone, and tap on Build number seven times. Now, head over to Settings System Developer options.

Scroll down to the Networking section. From here, enable the toggle next to Disable absolute volume.

Posts you might like

Read Also: Samsung Galaxy Watch 42mm Bluetooth

How To Set Up Android To Read Your Texts Aloud

Ben Stockton is a freelance tech writer from the United Kingdom. In a past life, he was a UK college lecturer, training teens and adults. Since leaving the classroom, he’s been a tech writer, writing how-to articles and tutorials for MakeUseOf, MakeTechEasier, and Cloudwards.net.He has a degree in History and a postgraduate qualification in Computing. Read more…

Its not always convenient to read text messages on your Android phone, especially if youre driving. Rather than risk trouble with the law, you can use Androids built-in features that read texts aloud.

These features can also benefit people with poor eyesight, or those who want to reduce their screen time. There are also third-party apps that read your texts to you.

Lets look at all the options, and how you can get set up.

How To Make Headphones Louder 2019 Guide

    Your guide

    Michael Gray

    There is nothing more disappointing than having to be limited by a lower volume on your headphones. Music will never sound better unless it is louder. Audiophiles among you will definitely agree with that statement.

    In fact, you are reading this article is in itself should be an indication to prove that you love louder music. If you are indeed looking ahead to increase the volume on your headphones, check out the tips we provided in this tutorial.

    Don’t Miss: Jabra Talk 25 Bluetooth Headset

    Get A Bigger Bluetooth Speaker

    If none of the solutions above works for you, you will probably need a bigger and powerful speaker. Check our Bluetooth Speakers section for a cheaper one. We have many different top performing speakers at a price to which you cant say NO.

    If you have any questions, comments or other solutions, please leave it in the comments. If any of the solutions worked for you, you can send us your videos, tag us on Facebook, Instagram or Twitter. Now its time to enjoy the music!

    Adjust Your Computer’s Volume And Sound Settings

    How To Fix Low Volume Issue On Bluetooth Earbuds | Make Earphones loud Android/ISO

    Whether it’s a Mac or Windows, interfaces can change the output of headphones.

    For Microsoft Windows users, the “Volume Mixer” allows you to set volume settings for individual speakers or headphones. Right-clicking the volume icon or searching “Adjust System Volume” in the Windows Control Panel will open the window to change your sound settings.

    To find the sound settings on a Mac, click the apple icon in the top left corner of the desktop, and open System Preferences to locate the Sound menu. From there, a list of output options will show you the volume levels of the connected device you’re using.

    If your headphones have a built-in amplifier or volume setting, adjust them first before changing your computer settings.

    Read Also: Bathroom Fan With Led Light And Bluetooth

    Use A Volume Increase App Or Adjust Eq Settings

    If you’re listening on a phone and can download apps, you’re in luck. There are a handful of apps for both Apple and Android that can help with headphones not being loud enough. Take a look at the app store for the app with the best reviews. Since this changes so often, we aren’t going to recommend any singular app outright, they all have similar functions. You may also want to consider checking the EQ settings on your phone itself. Sometimes these settings are “optimized” by the manufacturer but don’t suit your specific listening preferences. Play around with the settings until you get something you like.

    Disable Absolute Volume On Your Smartphone

    Android restricts how high the volume goes when you play audio over Bluetooth. This means that even when the phone volume and the speaker volume are cranked to maximum, you will still experience low volume. The feature was meant to ensure that anyone playing audio on Bluetooth headphones does not play loud enough to damage their ears.

    This has never been an issue with the wired headphones as you could crank the volume as much as you needed. For you to experience a high volume, you need to disable absolute volume so that you can increase the volume as you need.

    The Absolute Volume restriction is only available in Android phones running Android 7 Nougat or better. If your Android has a lower version of Android, you may not have this issue.

    Open Settings on your phone and scroll down to About Phone. While there, scroll down to Builder Number and click on it seven times. You will see a message that says you are already a developer.

    From there, go back to the About Phone menu and scroll down to Developer Options. At the top of the page, you will see the Enable, and you can toggle the button to switch on developer options. The device will give you a warning when you turn on developer options telling you that you might change the performance of your device.

    If you have an iOS device, this will not be a problem, so you have to check other solutions to this problem.

    You May Like: Bluetooth Speaker With Rca Input

    How To Make A Louder Sound On Android An Increase In Volume On Android Through The Engineering Menu Is A Step

    Extra popularity in the world, smartphones created on the android operating system are conquered. For most people, the smartphone has become not just a means for making calls, for many mobiles is a connection with the outside world.

    Smartphone created on the Android system has a mass gain. Such devices have high screen resolution, the presence of the front and main chamber, and in some models double camera, Increased inner memory, Two stereo speakers and this is just a small list of pluses of smartphones.

    Today, you will almost not meet a person who would not listen to music or radio on the go. Of course it is all connected with our mad rhythm of life and almost every person you need to have time everywhere. Sometimes the owners of smartphones face the problem of very small volume on android. Let’s try to deal with this problem.

    The modern system of smartphones allows you to work simultaneously by several applications, without requiring their closure and sometimes it incorrectly affects the work of the dynamics, so you should not use all the ways at the same time.

    Check The Range And The Position Of The Speakers

    How To Make Headphones Louder: PC, Android, iPhone &  More ...

    Bluetooth works at a range of 30 feet. Newer versions can connect devices up to 100 feet apart, but the range is still limiting. You need to ensure there are no walls in between the speaker and the streaming device.

    You also need to ensure the two devices are as close together as possible so that the signal is strong and the quality impressive. If the quality of the audio is poor, you might perceive that as low volume, but that may not be the case.

    If you have a WiFi router at home and there are so many devices connected, the wireless network might interfere with Bluetooth, affecting the quality of the audio. Your speaker probably comes with a manual on how to position it. You need to ensure your speakers face you and not a wall or any other obstructions.

    Recommended Reading: Adding Bluetooth To Vintage Receiver

    Shut Down The Unneeded Applications

    Your smartphone would come with a limited processing power. The speed at which your system works would be dependent upon the number of applications running.

    Too many applications may throttle the audio performance of your smartphone. Close down all the applications from the background so that the entire processing power is dedicated to the audio performance.

    Improve The Quality Of Your Files On A Computer

    If your headphones only have alow volume while playing a media file in your android device, there is a huge possibility that the problem is your files.

    That means you need to move your media files to your computer using a USB cable or an SD card. From there, you can adjust the audio settings of the file and amplify the sound to suit your taste.

    After adjusting the volume, you can transfer the media files back to your phone and start enjoying an improved volume. However, you need an audio editing program to make adjustments on your media files.

    Read Also: Lg Bluetooth Surround Sound Speakers

    Why Is My Radio Louder Than My Bluetooth

    The main reason your radio might be louder than your Bluetooth is that Android devices restrict the volume of sound sent to Bluetooth audio devices in a bid to protect your ears. Another reason is that Bluetooth compresses files and then sends them to the amplifier and then to the speaker or directly to the speaker. This is unlike a radio that might stream audio or play audio directly.

    The process of compression involves reducing the size of the files so that they are sent as signals to the Bluetooth speaker. As the wireless technology compresses the file, the quality of the file distorts a little, and you may hear the audio as low in volume.

    However, you can fix the problem and enjoy better quality and high volume sound. Below, I explain how you can tackle this problem.

    Volume Issues When A Phone Running Emui 91 Or Later Is Connected To A Bluetooth Device

    How to fix low volume issue on the bluetooth headphones/earphones in hindi
    Volume issues when a phone running EMUI 9.1 or later is connected to a Bluetooth device

    Problem:

  • When the user presses the Volume up or down button on the paired Bluetooth device, the volume slider does not appear on the phone or the slider unexpectedly appears.

  • The phone’s volume is too high or too low after being connected to a Bluetooth device.

  • After connecting the phone to a Bluetooth device, the user cannot adjust the volume using the volume slider on the phone.

  • Cause:

    Bluetooth absolute volume is a new feature that is enabled by default in EMUI 9.1. In EMUI 9.1.0.150 and later, this feature is disabled by default.

    When your phone has Bluetooth absolute volume enabled and is connected to a Bluetooth device that supports this feature:

    • Volume adjustments will be synced between your phone and the Bluetooth device, and you can adjust your phone’s volume from the Bluetooth device.
    • After connecting to some Bluetooth devices, your phone’s volume adjusts to the maximum level. You can manually adjust the volume on the Bluetooth device.
    • Some Bluetooth devices are incompatible with your phone, and this may result in volume adjustment issues.

    If the connected Bluetooth device does not support Bluetooth absolute volume, volume adjustment on your Bluetooth device and phone are controlled separately.

    Solution:

    Enable or disable Bluetooth absolute volume according to your preferences by performing the following:

    Don’t Miss: Death Star Bluetooth Speaker Levitating

    Increase The Volume Of The Ringtone Using The Simple Eq Equalizer

    Equalizer Simple EQ is suitable for detailed sound settings – one of the simplest free equalizers on android. The increase in volume can be achieved by driving frequency sliders 60 Hz, 230 HZ and others. There is also an amplification of “bass” and stereo effect. After the first startup, the program remains in the background and provides the specified volume and sound quality in all use scenarios.

    In the image: Sound setting on Android using the Simple EQ Equalizer

    You can download the program from its official page in the apps android app store – Download Simple EQ Equalizer.

    Boosting Your Speakers Volume On Windows

    While turning your Windows volume to 100 produces adequate sound, sometimes a slight boost can significantly optimize the experience you get when watching, viewing, or listening to media on your laptop. If you find the 100% default Windows volume isnt enough for you. here are simple fixes you can use to improve it:

    Employ Audio Enhancements

    Audio boosts in Windows helps to maximize the volume your overall system can produce. Usually. Windows have a loudness equalizer that should be configured to produce higher sounds. Below is a straightforward procedure for this solution:

    • Look for the Volume icon on the toolbar, then right-click it.
    • Go to the Open Volume Mixer tab.
    • Select the device youre using presently and click it
    • Navigate to the Enhancement tab and select the loudness equalization tab.
    • Lastly, click OK, then Apply tab.

    The above procedure will significantly boost your Windows volume to be even louder. However, if your sound card doesnt support loudness equalization, you can consider other solutions below.

    Use VLC Player

    You can quickly boost your multimedia videos and audios volume using the VLC player. This player can increase media volume to 200%. which is twice the default 100% Windows volume.

    You can use a mouse or keyboard hotkeys to boost sound intensity on VLC. However, you should note that this technique can cause audio clipping and distortion as you increase the volume. While its a quicker solution, it may not be the cleanest.

    Use Sound Booster Plugins

    Don’t Miss: Bluetooth Keyboard With Usb Port

    Popular Articles

    Related Stories