Ingenico Card Reader Bluetooth Pairing

Why Does My Apple Pay Not Scan

How to Set Up Ingenico Link/2500 Reader with the ShopKeep Register

Sometimes, there are issues that prevent the reader from properly interfacing with your iPhone, and trying another reader might be the only option to get a successful scan. Reboot your device. Very rare issues can be fixed by restarting your device and trying to use Apple Pay again. Remove and add your card again.

Secure Network Configuration Best

Consider the following best practices for configuring your network for the iSMP4:

  • Configure a DHCP IP address range to connect terminal devices to a dedicated subnet. Alternatively, use static IP addresses reserved for the devices.
  • Configure a new WPA Wi-Fi network for the new device subnet. Optionally, access to the network can be restricted to the specific MAC address or IP address of the device. For extended security, you can restrict the services or ports that are allowed to communicate over the network.

How Do I Use The Lightning Sd Card Reader On My Ipad

Apple USB-C to SD Card Reader.

  • Connect the adapter to your iOS device.
  • Connect your digital camera to the adapter by USB or insert an SD card.
  • Tap Import All to import your content, or tap specific items, then tap Import.
  • In the same way How do I get my iPad to read a micro SD card?

    Take the SD card out of your digital camera and insert it into the slot on the reader, then plug the reader into your iPad. The iPads Photos app will automatically open on an Import screen. Either tap to tick the images you want to transfer then tap Import, or just tap Import All to transfer the lot.

    Subsequently, Why is my apple SD card reader not working? When your iPhone SD card reader is not working, you also need to check if picture files are in the correct folder or not. You cant select picture files into an SD card and then plug that SD card into the lightning card. Thus, the picture must be in the sub-directory or a DCIM folder.

    How do I connect my card reader to my iPad?

    Payment Processors. Card Readers Setting up a card swiper on your iPad. Assign the card reader in Lightspeed Retail POS

  • Tap Payment Terminal on the profile screen.
  • Select the appropriate card swiper from the list of available options.
  • Tap Done.
  • Read Also: Bose Soundlink Bluetooth Speaker Iii

    How Do I Reset My Ingenico Card Reader

    resetIngenicothethethethea new

    . In this manner, how do I reset my Ingenico card reader iPP320?

    On the PIN Pad, hold down the yellow key and press the punctuation key at the same time. The iPP320 PIN Pad will beep and restart. 2. When you see the version information screen, you have 10 seconds to press the red key, and then press the green key.

    Similarly, how do you reboot a credit card machine? Fix Credit Card Terminal Issues

  • Disconnect the power cable to the terminal and router.
  • Unplug the CAT 5 cables connecting the equipment.
  • Wait approximately 30 seconds. Reconnect the cables and the power on the devices from the wall to the terminal.
  • Allow 60 seconds for the terminal application to reboot and establish a connection with the router.
  • Also to know is, how do I reset my Ingenico machine?

    Try a soft reboot.

  • Hold down the clear button and the punctuation button at the same time for 3-5 seconds, until the terminal turns off.
  • Once off, hold the enter button until the terminal powers on.
  • Try the transaction again.
  • How do I reset my ShopKeep card reader?

    Hold the iCMP’s power button for two seconds to reboot the reader. After the iCMP turns back on, pair it with the iPad. In the ShopKeep app, open the Main Menu and go to the ‘Card Readers‘ screen. If there is a check next to the iCMP on this screen, troubleshooting is complete.

    How Do I Connect Ingenico To My Computer

    Ingenico iCMP Bluetooth PIN Pad Card Reader

    Connect hardware

  • Plug the connection cables flat end into the payment terminal and secure it with the included screws.
  • Plug the power supply into the connection cables round end.
  • Plug the connection cables USB end into the back of the computer.
  • Plug the power supply into an electrical outlet.
  • Dont forget to share this post with your friends !

    You May Like: What To Look For In A Bluetooth Speaker

    Accessing And Navigating The Bolt Sos Menu

    The Bolt S.O.S. menu allows you to access the device Version, Date and Time, Server Properties, Ethernet Properties and Offline Mode.

    • Press F, 7, 6, 7 on the device’s number pad to access the Bolt S.O.S. menu.
    • Press F1 to navigate left.
    • Press F2 to navigate down.
    • Press F3 to navigate up.
    • Press F4 to navigate right.
    • Press O to select.
    • Press < to clear.
    • Press X to cancel or return to the main menu.

    How Do I Turn My Ipad Into A Square Stand

    Plug In the Square Stand

  • Place your iPad into the Square Stand by inserting the connector on the iPad firmly into the connector on the stand.
  • Secure your iPad to the stand by inserting the security pin.
  • Plug the USB hardware hub into the stand and power adapter.
  • Plug the power adapter into a grounded AC outlet.
  • Recommended Reading: Motorola Xpr 3500e Bluetooth Earpiece

    Basic Functions Of Ingenico Icmp Credit Card Reader

    Turning the iCMP On

  • Briefly press the button on the right side just above the micro USB port.
  • Wait for the reader to boot up. It will show an Ingenico logo.
  • Turning the iCMP Off

  • Unplug the credit card reader from power.
  • Simultaneously hold down the yellow ‘< ‘ key and the ‘.,#*’ key on the reader for a few seconds.
  • Accepting Credit Cards

  • Ring up a credit transaction as normal.
  • With the card stripe facing up, swipe the card through top slot of the reader.
  • Wait for payment to be approved and continue with closing the transaction as normal.
  • Apple Pay & Contactless

  • Ring up a credit transaction as normal.
  • At the register once credit is selected, the iPhone will open Passbook automatically so the customer can tap on the credit card to be used.
  • Customer holds iPhone near or on the credit card reader while touching the home button on their phone.
  • Customer waits for a slight vibration, a check mark on screen and a beep for confirmation of payment initiation.
  • Wait for payment to be approved and continue with closing the transaction as normal.
  • How Do I Connect My Ingenico Ipp320 To My Computer

    How to Set Up Ingenico EMV Chip Card Reader with the ShopKeep iPad Register

    Connect the Ingenico iPP320 terminal to your network Place your iPP320 terminal face down in front of you. Connect the HDMI end of its connection cable to the HMDI port at the top of the terminal. Optionally, screw in 2 screws to secure the connection cable and 1 screw to secure the back cover of the terminal.

    Also Check: Best Waterproof Bluetooth Speaker For Utv

    To Pair Your Ingenico Ismp4 Card Reader To Your Ipad

  • Ensure that your Ingenico iSMP4 card reader is adequately charged.

  • On the iPad, open Settings and turn on Bluetooth.

  • 3. Turn the Ingenico iSMP4 card reader ON by pressing the power button on the right side of the device.

    The BT Pairing Required message appears on the card reader.

    4. Press the F1 button on the device. Note: When you press F1, the device scans for available iOS Bluetooth devices. If you are using a non – iOS device, then press F2. The iSMP4 scans for available Bluetooth iOS devices.

    5. Press F2 or F3 keys to scroll and locate your iPad on the iSMP4 device.

    6. Press the Green button on the iSMP4 device to select your iPad.

    A Bluetooth pairing pin appears.

    On the iPad, a pop-up to enter the PIN appears Note: The name of the device may appear as Cordless Phone. This is a common device naming error. You can proceed to enter the PIN.

    7. Enter the PIN that is visible on the iSMP4 device in the iPad and tap Pair. The following happens: – On the iPad: The iSMP4 card reader appears under My Devices as connected. – On the iSMP4: This lane closed message appears.

    Important: If you do not enter the PIN on your iPad within 1 minute of seeing the prompt, the pairing will time out and you must enter a new PIN.

    8. On your iPad, launch Zenoti Mobile POS and tap Settings. The Settings screen opens. 9. Tap Connected Card Readers. You should see your card reader listed here.

    This indicates that the card reader setup is complete and you are ready to

    How To Connect And Use The Ingenico Link/2500

    Please note, the Link/2500 shipped by StayNTouch is different than the Link/2500 shipped by MerchantLink, which is for EMV devices. The table below highlights the differences between the two types of Link/2500 devices.

    Link/2500 from StayNTouch
    Does not support key creation
    Bluetooth pairingSet up like a regular EMV device
    Will show under the device list on StayNTouch Cloud PMS under Settings > Device StatusMapped to EMV devices with specific lanes assigned by MerchantLink and via workstation configuration in StayNTouch Cloud PMS
    WiFi only and connects via Ethernet. Generally configured as static IP however, dynamic IP is available if the hotel has that segment available on their network.
    No Bluetooth pairing required
    Will not show under the device list on StayNTouch Cloud PMS under Settings > Device Status


    See the steps and videos below for instructions on pairing the Link/2500 with an iPad, creating keys, and swiping credit cards.


    Please note, pairing a Link/2500 with an iPad only works through Bluetooth and when using the StayNTouch Cloud PMS application on the iPad. To pair the Link/2500 with an iPad, follow the steps below:

  • Turn on Bluetooth connection from Settings > Bluetooth on your iPad.
  • To pair, press 0, 0, 0, then 1 on the Link/2500.
  • Use the F3 button to go to 3 – Bluetooth Parameters. Click the green button to confirm your selection.

  • Open a reservation from the Manager Dashboard.
  • Also Check: Clone A Phone Via Bluetooth

    How Do You Set Up A Card Machine

    Connect and charge

  • Connect the power. Connect the power lead to the base unit.
  • Plug the power lead into the mains. Remember to turn the power on at the wall.
  • Put your card machine on its base.
  • Leave it for a couple of hours.
  • Power up your card machine.
  • Pair your card machine and base unit.
  • Get to know your card machine.
  • Ingenico Iwl222 16mb Bluetooth Wireless Terminal/ Itegrated Printer/ Internal Pin Pad/ Smart Card Reader / Contactless Reader

    Ingenico ICMP Icm122
    • SCR stands for Smart Card Reader. Smart Card is a credit card or ID card that contains a chip. When inserted into a reader or held within a few inches of the reader , data are transferred to a central computer.
    • EMV stands for Europay, MasterCard, and Visa, the three companies that originally created the standard, is a global standard for credit and debit payment cards based on chip card technology. The EMV smart card provides greater safety than a magnetic stripe card because it uses more sophisticated security methods.
    • NFC stands for Near Field Communication, that enable two electronic devices, one of which is usually a portable device such as a smartphone, to establish communication by bringing them within about 4 cm of each other.
    • If you need the Terminal Stand for iWL222, search Tynex SKU# for FirstBase : Ty158107 , Ty158108 , Ty158109 , Ty158110
    • If you need the Terminal Stand for iWL222, search Tynex SKU# for SafeBase : Ty158111 , Ty158112 , Ty158113 , Ty158114

    Also Check: Bluetooth Headphones That Work With Apple Watch

    Register And Pair Device

    After a source key has been generated, return to the Device Manager section under Settings. Click on the ‘+’ button to add a new Device.The following screen will appear to register the device:

    Enter the Device√Ęs Name, select the Source Key from the drop down menu as shown below, and select the Terminal Type as Direct.

    Please Note: Device name can contain letters, numbers, spaces, and dashes. All other characters will be filtered out.

    Once the Device Name, Source Key, and Terminal Type have been selected, click on ‘+Register’. The Merchant Console will then generate a pairing code to pair your device to the Merchant Console.

    The Ingenico device will then ask you to enter the pairing code .

    iSC Touch 480 Pairing Screen:

    Once the pairing code has been entered, your device should be connected. In the Device Manager, the green icon in the top right of the box indicates that the device is connected.

    Pair Ingenico Icmp Card Reader To An Ipad

    To accept credit card payments, you will need to pair your Ingenico iCMP card reader with your iPad. Note that the iPad must already have the Zenoti Mobile POS installed.

    Important: Ingenico announced the withdrawal of sale for the iCMP card readers from the end of 2019. Support for iCMP will be provided till the end of 2021. Zenoti recommends to use Ingenico ISMP4 as a replacement.

    To pair your Ingenico iCMP card reader to your iPad

    1. Ensure that your Ingenico iCMP card reader is adequately charged.

    2. On the iPad, open settings and turn on Bluetooth.

    3. Turn the Ingenico iCMP card reader on by pressing the power button on the right.

    The BT Pairing Required message appears on the card reader.

    If you do not see the see the BT Pairing Required message, see the Troubleshooting section at the end of this article.

    4. When BT Pairing Required message appears, press the F1 button.

    5. Scroll and find your iPad by using the F2 or F3 keys.

    You May Like: Bluetooth Cac Reader For Ipad

    How Do I Connect My Ingenico Card Reader To My Computer

  • Using the included screws, secure the connection cables flat end into the payment terminal.
  • The power supply should be plugged into the round end of the connection cable.
  • The USB end of the connection cable should be plugged into the back of the computer.
  • An electrical outlet should be connected to the power supply.
  • Why Is My Ingenico Machine Not Working

    How to Pair Your iPad and iCMP Device

    Check to see if the Bluetooth is enabled in iOS with Ingenico ICMP Troubleshooting. If the device is not listed in My Devices, check. You can connect the reader to the Ingenico by tapping on it if My Devices shows it. You can reboot the iCMP by pressing the # and buttons yellow if you are unable to connect.

    You May Like: Bluetooth Headset For Bike Riding

    The Complete Payment Solution To Revolutionize Enterprise Mobility

    Designed from the ground up for all-purpose mobile use, the iSMP4 Companion can be connected with a tablet or smartphone to create a secure, smart, mobile point of sale system.

    Universal mobility and payment acceptance

    The lightweight, 7-oz. design makes it easy to accept all forms of payment on the go, including EMV chip & PIN, magstripe, and NFC/contactless. The iSMP4 also supports a wide range of payment use cases and can be used as a companion, integrated, or stand-beside device.

    User-friendly and ergonomic design

    Designed from the ground up for professional use, the iSMP4 includes a 2.8 backlit color display, the largest in its class, to provide an optimal user experienceeven in bright outdoor environmentsand an illuminated EMV slot that guides consumer interactions. The accompanying universal tablet enclosure provides businesses with the flexibility to fit a variety of 8 tablets without restricting merchants to a single device. At a total weight of under 2 lbs, the enclosure allows associates to carry and use the iSMP4 and tablet in one hand, with a center gripping point and easy access to the iSMP4s barcode scanner and the tablets camera.

    Enterprise-grade performance and security

    Wide range of connectivity and integration options

    How Do I Connect The Moby/5500 Reader To My Device

    Pairing via Bluetooth

    The MOBY/5500 reader pairs seamlessly to your device via Bluetooth. Follow the instructions below to pair:

    1. Go to the cart screen.

    2. Tap the Menu icon in the top-left corner to go to the Settings section.

    3. Tap the Settings row.

    4. On the Settings screen, tap on ManageReaders.

    5. You will now be presented with the Manage Readers screen. Tap on the Connect a New Reader button.

    6. Next, select the connection type. For Bluetooth connection, select Bluetooth.

    7. RPX5 will prompt you to select the type of reader you wish to connect . If you are pairing the Moby/5500, tap the corresponding image.

  • Once the reader has been turned on and begins searching for your device, it will become available to select from the Available Readers list. Click the appropriate MOBY reader from the list.
  • RPX will then display the device name and a 6-digit passkey, and a random pattern of LED lights will appear on the front of the reader. Tap Ok and the Moby/5500 will be temporarily paired for 30 seconds.
  • Press the On/Off button on the Moby/5500 reader.
  • The Moby/5500 will beep, and both the mobile app and the Moby/5500 will display the same random pattern of LEDs.
  • Tap Confirm on RPX to validate that the LED light pattern is the same on both the Moby/5500 and the mobile app.
  • You May Like: Bluetooth Radios At Best Buy

    How To Pair Ingenico Ismp Bluetooth

    Ensure that Bluetooth is enabled before connecting the iCMP: Tap on Settings and make sure Bluetooth is enabled. The reader should display BT Pairing Required when you power on the iCMP using the power button on the right side. You can quickly tap the F key four times if the screen shows a Welcome message.

    Popular Articles

    Related Stories